For a teacher with a class? The classroom edition has the full plan, slides and standards.

Homeschooling PDF

Family edition

Claw Game Maker: Build a Fair Machine

Ages 11-14 ยท about 45 minutes, in one sitting, with more if they want to share

Your child designs a fair claw machine in Claw Game Maker, starting from one that is not. The point is a design loop: change one thing, test it, read the result, and keep the machine fun while every prize stays winnable.

What you need

Before you start: try it once yourself

Open mytekdev.com/try/clawmaker?lesson=build-a-fair-machine&ref=fam-clawmaker-4. The unfair starter: three big bears, three boxed toys, four bears and two capsule balls, under a claw with bare metal tips and grips of 1.2, 1.0 and 0.6 newtons.

  1. The check. Open Build, Share, and press Run the honest machine check. It names the kinds that cannot be lifted: the big bear and the boxed toy, and at these grips the bear too.
  2. One change. Open Claw. Pick rubber pads. Run the check: the bear passes, the big bear and the box still fail.
  3. Again. Turn the Grab, Lift and Carry grips up to 4, 3.5 and 2.8 N. Run the check: the big bear passes. The box needs about 4 N with three prongs or 2 N with four: pick 4 prongs.
  4. Tune. Open Test and run the robots. If they win most plays, bring a grip down or the pad angle back, and check again. About 7 of 20 is the target.
  5. Share. Win a prize from it yourself (the check asks for that too), then share it. Friends play it from the share page.
The check fails by name, so every change has a target. A machine that passes with every grip at 12 N is fair and dull, and the robots say so.

The ideas, in plain words

This is MS-ETS1 with a real constraint and a real test. The constraint comes from the trade: several states require that every prize on show in a crane game be obtainable with the claw as set, and the app's honest machine check is modeled on it. The criterion is play: a machine the robots win nine times in ten is a vending machine, and one they never win is a thief; one in three is a game.

The trade-offs are the physics of the first two parts of this series. A boxed toy has flat sides nothing can get under, so it needs a squeeze: about 4 N per prong with three rubber-padded prongs, or about 2 N with four. A grip that high makes the plush bears nearly certain, so children look for other levers: more prongs, longer prongs, a different pile.

The robots are the model that generates data for iterative testing (MS-ETS1-4). Twenty plays is a rough measure; children who want to be sure run sixty.

Do it together

  1. Open mytekdev.com/try/clawmaker?lesson=build-a-fair-machine&ref=fam-clawmaker-4 together. Open Build, Share, and Run the honest machine check.

    You'll know it worked when: It fails and names the big bear and the boxed toy.

  2. Open Build, Claw. Change one thing: rubber pads, or a higher grip, or hooked pads. Run the check again.

    If you get stuck: The check names what still fails; change one thing for that kind.

    You'll know it worked when: Each change is for a reason your child can say.

  3. When it passes, open Test and run the robots. Aim for about 7 wins in 20.

    You'll know it worked when: If they win nearly every play, turn a grip down and check again.

  4. Talk about the trade-off: what made the box liftable, and what did that do to the bears?

    You'll know it worked when: Your child can name one trade-off and how they settled it.

Talk about it

Ask these while you work together. A child who has understood it can answer them without help:

The third question is the real test: a child who can name the trade-off and how they settled it has run the loop.

For younger and older kids

Younger: For a younger child, set the level to Kid and stop when the check passes.

Older: For a teenager, make the boxed toy winnable without turning the grip up: more prongs, longer ones, or a pile that stands it on end.

Keep going

Bring it into other subjects

For your records

Ready to copy into an hour log, a portfolio or a transcript.

LessonClaw Game Maker: Build a Fair Machine
SubjectsEngineering, Physical science
Time45 minutes
What we didRan a design loop on a claw machine simulation: stated criteria and a constraint, changed one thing at a time, tested with an honest-machine check and robot players, and shared the result.
Skills practicedEngineering design; Testing against a constraint; Reading data from a model

Claw Game Maker: Build a Fair Machine

Activity sheet (optional)

Name: ______________________________ Date: ______________

Open the app: scan the QR code, or go to mytekdev.com/try/clawmaker?lesson=build-a-fair-machine

Essential question: How do you make a claw machine that is fair to the player and still fun?

Warm-up: An unwinnable prize: wrong, or just hard? What would you change first? ________________________

  1. Vocabulary. Criteria, constraint, honest machine check, iteration, trade-off: write each in your own words.
  2. The design log. Each round: what I changed, why, the test I ran, the result.
  3. The rate. Robots won ____ of 20 with the check passing. A friend's machine: ____ of 20, and what they did: ________

1. What was your hardest trade-off, and how did you settle it?

2. Why does the check ask that the maker has won a prize too?

Quick check

Name: ______________________________

1. A constraint is (A) something a design must do well (B) a rule a design must obey (C) a change you try

2. The honest check fails on the boxed toy. The best next step is (A) turn every grip to 12 N (B) change one thing for the box and check again (C) take every prize out

3. Name one trade-off in a fair claw machine and how you would settle it.

Answers

QuestionAnswerWhy
1BCriteria are what it should do well; a constraint is what it must obey.
2BOne change, one test; a maximum grip passes the check and ruins the play.
3For example: the grip that lifts the box makes the bears easySettle it with another lever: more prongs, longer prongs, hooked pads, or a different pile. A full answer names the test used.

If your state or umbrella school asks, this lesson covers NGSS MS-ETS1-1, NGSS MS-ETS1-2, NGSS MS-ETS1-3, NGSS MS-ETS1-4.