Family edition
Claw Game Maker: Squeeze or Cradle?
Your child finds out how a claw really holds a prize, in Claw Game Maker. The point is that curled tips cradle a prize from below with almost no squeeze, while straight tips can only squeeze, and squeezing a round prize hard pops it out.
What you need
- A computer or Chromebook with a current browser.
- The lesson link: mytekdev.com/try/clawmaker?lesson=squeeze-or-cradle&ref=fam-clawmaker-2. No account, no email and nothing to install.
- Optional: a smooth ball to cup and to squeeze.
Before you start: try it once yourself
Open mytekdev.com/try/clawmaker?lesson=squeeze-or-cradle&ref=fam-clawmaker-2. A claw machine in a room, seen the way a player sees it: a 70 cm box, three rubber-padded prongs parked closed over the chute, and a pile of bears, ducks and capsule balls.
- The ball. Open Test, pick Ball in a capsule on the bench, set 0.3 N and run it. It holds: the curled tips close under it.
- Straight. Open Build, Claw, and drag Tip curl to nearly straight. The prongs change as you drag. Bench the ball at 0.3 N: it slips. At 12 N it still slips: the squeeze pops it out.
- Hooked. Put the curl back and drag Pad angle to hooked. Bench the bear at 0.5 N: cradled.
- Metal. Pick bare metal tips and bench the bear again at 0.5 N with the hooked pads: it still holds. At 0.5 N with straight metal tips it slips at once.
The ideas, in plain words
A claw can hold two ways. Squeezing uses friction: the tips push in, and friction up along the tips carries the weight, up to a limit set by the push and the grippiness of the pair of surfaces. Cradling uses shape: the tips close under the prize and carry it the way cupped fingers carry a ball, and the push barely matters.
A 45 g capsule ball has a friction line of about 0.3 N with rubber tips, and it cradles at 0.3 N with curled tips. With straight tips it cannot be held at any grip: a hard sideways squeeze on a smooth ball pushes it out, like a wet bar of soap. A bear has limbs the tips can hook under, so hooked pads cradle it at 0.4 N on the bench, half its friction line.
Real arcade claws have curled tips with rubber pads: the curl for cradling, the pads for friction when it has to squeeze. Children who set the pads to hooked find the honest machine check of Build a Fair Machine easier to pass, and the bench shows why.
Do it together
- Open mytekdev.com/try/clawmaker?lesson=squeeze-or-cradle&ref=fam-clawmaker-2 together. Open Test and bench the capsule ball at 0.3 N.
You'll know it worked when: It holds, at a grip far below the bear's.
- Open Build, Claw, and drag Tip curl to nearly straight. Bench the ball again.
If you get stuck: Zoom in on the claw with the scroll wheel to see the tips change as you drag.
You'll know it worked when: It slips: straight tips can only squeeze, and the ball is smooth.
- Drag Pad angle to hooked and bench the bear at 0.5 N.
You'll know it worked when: The bear is cradled at a grip that would never squeeze it.
- Pick bare metal tips and bench the bear again with the hooked pads.
You'll know it worked when: Your child can say that cradling needs the shape, not the friction.
Talk about it
Ask these while you work together. A child who has understood it can answer them without help:
- What did the tips do under the ball at 0.3 N?
- Why did the ball slip at 12 N with straight tips?
- Why does the bear cradle with hooked pads even on bare metal?
- Which prize would hooked pads not help, and why?
- What do real claws have both the curl and the rubber for?
For younger and older kids
Younger: For a younger child, cup a ball in your hands and then try to lift it by squeezing its sides with straight fingers.
Older: For a teenager, compare each holding grip with the friction line at the High school level and find which holds are under the line.
Keep going
- Work out the ball's friction line and compare it with the grip that cradled it.
- Find a pad angle at which the bear holds at 0.5 N, then explain why hooked pads fail on the boxed toy.
- Solve the Slippery ball puzzle under Puzzles.
Bring it into other subjects
- Math: the friction line is weight divided by the prongs times the grippiness. Work it out for the ball, the bear and the boxed toy.
- Biology: how do a bird's feet hold a branch while it sleeps? Squeeze or cradle?
- Engineering: sketch a claw for a flat boxed toy, which nothing can get under.
- English: explain cradling to a younger child in three sentences, with a drawing.
For your records
Ready to copy into an hour log, a portfolio or a transcript.
| Lesson | Claw Game Maker: Squeeze or Cradle? |
|---|---|
| Subjects | Physical science |
| Time | 45 minutes |
| What we did | Used a claw machine simulation to tell holding by friction from holding by shape, changing the tips' curl, the pads and the material one at a time on a grip bench. |
| Skills practiced | Forces and friction; Shape and function; Testing one variable at a time |
Claw Game Maker: Squeeze or Cradle?
Activity sheet (optional)
Name: ______________________________ Date: ______________
Open the app: scan the QR code, or go to mytekdev.com/try/clawmaker?lesson=squeeze-or-cradle
Essential question: When does a claw hold a prize by squeezing, and when by cradling, and what does each need?
Warm-up: A smooth 45 g ball: more grip or less than a 180 g bear? Why? ________________________
- Vocabulary. Squeeze, cradle, tip curl, pad angle, friction line: write each in your own words.
- The guide. The ball at 0.3 N with curled tips: ______. With straight tips: ______. The bear at 0.5 N with hooked pads: ______.
- The settings table. For the bear and the ball, at straight, curled and hooked tips: the lowest grip that holds.
- Bare metal. The bear at 0.5 N, hooked pads, bare metal tips: ______. Straight metal tips: ______.
1. Why did the ball hold at 0.3 N and slip at 12 N?
2. Why do real claws have curled tips and rubber pads?
Quick check
Name: ______________________________
1. Cradling a prize means (A) squeezing it harder (B) the tips close under it and carry it on their shape (C) lifting it faster
2. A smooth ball with straight tips (A) holds at a high grip (B) pops out when squeezed hard (C) holds at any grip
3. Hooked pads on bare metal tips still cradle the bear. What does that show?
Answers
| Question | Answer | Why |
|---|---|---|
| 1 | B | Shape does the holding; the push barely matters. |
| 2 | B | A hard sideways squeeze on a smooth round prize pushes it out. |
| 3 | Cradling needs the shape, not the friction | Squeezing needs grippy surfaces; cradling carries the prize from below. A full answer says friction still helps when it must squeeze. |
If your state or umbrella school asks, this lesson covers NGSS MS-PS2-2.