Controller Lab teaching notes
For teachers, club leaders and parents. In about one period students pick a player, turn the starter Classic into a controller for that player's hands, try it on the Test bench and print a true-size template. A second period builds the card model and trades it with a classmate. Each part says what to say, what students do, what their screens should show, what usually goes wrong, and a question to ask. A section at the end covers the hand sizes, what is an estimate, gamepads in school, and printing.
Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Who is it for? Before anyone opens the app, ask the class whether the controller they use at home would fit an 8-year-old. Then open Controller Lab, click Age 8 in the Will it fit? card, and press Hold it.
Set up a free class Share to Google Classroom- About this lesson
- How to read this guide
- Part 1: whose hands? (5 minutes)
- Part 2: design for one player (20 minutes)
- Part 3: what each control sends (10 minutes)
- Part 4: print the template (10 minutes)
- Part 5: build it and test it with a classmate (second period)
- The hands, the estimates, gamepads and printing
About this lesson
Part 1 meets the Classic and the five hands. Part 2 picks a player and designs for them. Part 3 says what each control sends and tests it. Part 4 prints the template. Part 5, in a second period, builds the card model and tests it with a classmate.
Everything you are asked to say or point at is written here in the words on the screen. The tabs on the right are Player, Body, Grips, Controls, Colors and Map. The card in the corner of the stage is called Will it fit?; the line under the stage names the worst problem for the player, with Move it in and Next beside it.
How to read this guide
- Say what to tell the class, in a sentence or two. Use your own words if you like.
- Students do the steps, in order. Read them out or put them on the board.
- Screens should show what you see when you walk round the room and the step worked.
- What goes wrong the usual problems, and the fix.
- Ask one question to check the idea, not the clicking.
Part 1: whose hands? (5 minutes)
- Say This controller was designed for a 12-year-old. Let's see who else it fits.
- Students do Read the Will it fit? card. Press Hold it. Click Age 8 in the card, then Age 12 again. Press Let go.
- Screens should show Fits 4 of 5 hands. With Hold it, see-through hands on the grips and a green band from each thumb. With Age 8, red under the stage: Left center button, out of reach.
- What goes wrong The controller keeps turning: it sways until someone drags it, presses Hold it or opens Controls, which is on purpose. Hold it shows no hands: the player is set to Plays on a table, where a hand comes down flat on each button; set Two hands in Player.
- Ask Why is the small adult's hand smaller than the 12-year-old's?
Part 2: design for one player (20 minutes)
- Say Pick a player who is not you. Make the controller fit them first, then see who else it fits.
- Students do In Player, pick a hand size and how they play. In Body, keep the Classic or start from another design, and size it. In Grips, set the length, spread and thickness against the guide. In Controls, drag each stick and button where the player's thumbs reach, and make them bigger or smaller. Use Hold it to check. Colors last.
- Screens should show Their own controller, and a green line under the stage: every control is in easy reach for their player.
- What goes wrong A control will not go where it is dragged: controls stay on the flat of the face and do not overlap, so it stops at the edge or next to another. Everything went red after picking One hand only: the other hand's side is now a rest, so its controls have to move to the side that holds; Move it in helps. A design at the largest sizes fits only the large adult: that is the lesson; size it down or move the controls in.
- Ask What did you change because of your player, and who else does it fit now?
Part 3: what each control sends (10 minutes)
- Say A controller never sends jump or fire. It sends numbers, and the game decides what each number does.
- Students do Open the Map tab and read what each control sends. Pick what the game uses a few controls for. Then press Test bench under the stage: press buttons and push the sticks on a gamepad, or use W A S D, the arrow keys and Space.
- Screens should show On the bench, the pressed control glowing on their own design and its name and number in the text; pushing a stick up reads y -1.00.
- What goes wrong "Plug in a controller and press any button" stays up with a gamepad plugged in: the browser shows no gamepad until a button is pressed; press one. The gamepad is not the standard layout: press Map it and follow it. Keys do nothing: click the controller on the stage first, so the keys go to the app. A yellow line about one thumb doing two things: the Map says one thumb has to look around and jump at once; move one action.
- Ask Why is up a negative number, and why can a player move jump to another button?
Part 4: print the template (10 minutes)
- Say The template prints your controller at its real size. Measure the square before cutting anything.
- Students do Press Print the template. Print with Scale at Default, 100 or Actual size. Measure the 1 inch square. Keep page 2: the side and three cuts, and how many layers to stack.
- Screens should show On the desk: the face at true size with every control drawn and named, and page 2 with the side and cuts A, B and C.
- What goes wrong The square is smaller than an inch: the print was set to Fit to page; print again at 100. The Big button board prints in four parts: tape them where the red dashed lines meet.
- Ask Why measure the square before cutting the card?
Part 5: build it and test it with a classmate (second period)
- Say The app's reach is a good guess. A real hand is the test.
- Students do Glue the face page to thin card and cut it out. Cut more layers from foam board or thick card and stack them to the thickness on page 2; trim the edges round to match the cuts. Draw the controls or glue on bottle caps and buttons. Trade with a partner, who answers the three questions on the design sheet (Other files).
- Screens should show The design sheet beside the model: the two pictures, all five hands, the map, and the questions.
- What goes wrong The stack comes out too thick or thin: count the layers on page 2 again, since foam board and card differ. The partner's hand is nothing like the player's: ask them to answer as the player would, or find someone nearer that size.
- Ask What did your tester find hard to reach, and does Will it fit? agree?
The hands, the estimates, gamepads and printing
- The five hands: age 8 (150 mm long), age 10 (162 mm) and age 12 (177 mm) are averages from a study of 1,255 children aged 5 to 13 in China, the largest table by age we found. The small adult (165 mm) and the large adult (210 mm) are the 5th percentile woman and the 95th percentile man in a 2012 US Army survey. Hand length runs from the tip of the middle finger to the crease at the wrist.
- What is an estimate: no published source gives thumb reach by hand size, so the app takes a thumb as about 0.32 of the hand's length; one small study of adults measured about 0.35, so the app errs toward yellow. Where the thumb's base sits on the grip, the index finger's reach to the shoulders, how wide the grips may spread and how big a button a palm needs are working figures too.
- The grip guide is 19.7 percent of the hand's length: in a NIOSH study, the round handle people found most comfortable to squeeze hard. A controller grip is not squeezed all the way round, so it is a guide line, never a pass or fail.
- Gamepads: the browser reads them with no install. Most report the standard layout; Map it covers the rest. Plug in with a cable on school Chromebooks, since some schools turn Bluetooth off. Rumble shows only when the gamepad offers it.
- Printing: Scale at Default, 100 or Actual size, then measure the 1 inch square. The STL in Other files is a hollow model to hold, not a case for a real controller's circuit board.
More help
Is something on this page wrong or not clear? Write to us.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.