For a teacher with a class? The classroom edition has the full plan, slides and standards.

Homeschooling PDF

Family edition

Flight Lab: Stop the Dive

Ages 11-14 ยท about 45 minutes, in one sitting

Your child makes a paper plane dive in Flight Lab, then bends the back edges of its wings to make it glide, and uses a paper clip to move its balance point.

What you need

Before you start: try it once yourself

Open mytekdev.com/try/flightlab?lesson=stop-the-dive&ref=fam-flightlab-2. A short guide opens over the app. It is the classic dart, with its back edges flat instead of the 12 degrees up it usually comes with. To set an exact number, click a slider once and press the left and right arrow keys: each press moves it one step.

  1. The dive. Press Fly and Throw it (How hard 3): "A dive: 14 ft." The bench says to bend the back edges up a little to lift the nose.
  2. The bends. On Shape, set both back edges to the same number, then throw on Fly: at 4 it glides 19 ft; at 8 and at 12, 24 ft; at 16, 20 and 24 it still glides but slower and shorter: 21, 18 and 16 ft.
  3. The clip. With both edges at 20 (18 ft), pick Near the front under Paper clip: 21 ft. In the middle: 20 ft.
The moment that lands is the first glide. One small bend at the back changes the whole flight, and children want to know why.

The ideas, in plain words

A folded plane's weight acts at its balance point, which sits near the nose because most of the paper is folded there. The wings' lift acts a little behind the balance point, so it tips the nose down. Air pushes down on a back edge bent up, which tips the nose back up, like a seesaw with the balance point in the middle. When the two match, the plane glides. Getting them to match is called trim.

Too little bend and the nose drops: a fast dive. Too much and the nose is held up, the plane flies slower, and it lands short. A paper clip is weight: near the front it moves the balance point forward, away from the lift, so the plane can carry more bend before it slows down too much. Flight Lab says which side of the lift the balance point is, never a distance.

Common mistakes: the heavy nose itself tips the plane (weight acts at the balance point and cannot turn the plane about it); throwing harder will fix a dive; changing the bend and the throw together. Flight Lab works out each flight from the folded shape and the throw. A few of its numbers are our own, set where no published measurement exists, so a real paper dart lands near the distances on screen, not exactly at them. Real throws also vary more than the app's, real paper softens with use, and the app never shows a stall: its short paper wings tip over before they would stall.

Do it together

  1. Open mytekdev.com/try/flightlab?lesson=stop-the-dive&ref=fam-flightlab-2 together. A short guide opens over the app. Press Fly, then Throw it.

    You'll know it worked when: With flat back edges the plane dives into the floor at 14 ft.

  2. Press Shape. Set Left back edge and Right back edge both to 8. Press Fly and Throw it.

    If you get stuck: Click a slider, then press the arrow keys to move it one step at a time.

    You'll know it worked when: A steady glide of 24 ft.

  3. Try 16 and 24, the same on both sides, throwing each time.

    You'll know it worked when: 21 ft and 16 ft: still glides, but slower and shorter.

  4. With both at 20, pick Near the front under Paper clip and throw. Ask: why did the clip help?

    If you get stuck: Read the line under the clip choices.

    You'll know it worked when: About 21 ft, against 18 ft with no clip.

Talk about it

Ask these while you work together. A child who has understood it can answer them without help:

The fourth question is the real test: a child who describes a seesaw with the balance point in the middle has the idea.

For younger and older kids

Younger: For a younger child, try 0, 8 and 24 only, and balance a ruler on a pencil to show the seesaw.

Older: For a teenager, try another plane from the Plane bench and find its best bend.

Keep going

Bring it into other subjects

For your records

Ready to copy into an hour log, a portfolio or a transcript.

LessonFlight Lab: Stop the Dive
SubjectsPhysical science, Engineering
Time45 minutes
What we didMade a paper plane dive and glide on purpose, found its best trim by changing one thing at a time, and explained its balance.
Skills practicedForces and balance; Changing one variable; Engineering design

Flight Lab: Stop the Dive

Activity sheet (optional)

Name: ______________________________ Date: ______________

Open the app: scan the QR code, or go to mytekdev.com/try/flightlab?lesson=stop-the-dive

Essential question: Why does a paper plane dive, and how do you make it glide?

Warm-up: Your paper plane keeps diving into the floor. What would you change to fix it? ________________________

  1. Vocabulary. Balance point, back edges, trim, variable, dive: write each in your own words.
  2. The bend table. For back edges 0, 4, 8, 12, 16, 20, 24 (both the same, How hard 3): what it did ________; how far ________ ft. Then 20 with the clip Near the front ________ ft, and In the middle ________ ft.

1. Which bend went farthest? Why did less bend and more bend both go shorter?

2. Why did the paper clip near the front help the plane with a big bend?

Quick check

Name: ______________________________

1. A paper plane dives into the floor. You should (A) bend both back edges up a little (B) bend both back edges down (C) throw it harder

2. Moving a paper clip toward the nose moves the balance point (A) forward (B) backward (C) nowhere

3. Explain how bending the back edges up lifts the nose. Use the word balance point.

Answers

QuestionAnswerWhy
1AAir pushes down on edges bent up, which tips the nose up and stops the dive.
2AThe clip is weight, so the balance point moves toward it.
3A seesaw about the balance pointThe wings' lift acts a little behind the balance point and tips the nose down. The air pushes down on the bent-up back edges, far behind it, and tips the nose back up. "The bend pushes the back down" without the balance point is half.

If your state or umbrella school asks, this lesson covers NGSS MS-PS2-2, NGSS MS-ETS1-3.