Gingerbread House Lab teaching notes
For teachers, co-op leaders and parents. One lesson of about forty-five minutes, for ages seven to fourteen. It ends with every student able to say why a template only fits dough of one thickness. Two turns follow for classes that want them: candy by code, and a real house from cardboard or dough. Each part says what to say, what students do, what their screens should show, what usually goes wrong, and a question to ask. You do not need to bake or to code.
Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Each student prints the template for the same cottage twice: once for dough 4 mm thick and once for 8 mm. Before they look, they guess which pieces change and by how much. Then they measure the two side walls with a ruler.
Set up a free class Share to Google Classroom- About this lesson
- How to read this guide
- Part 1: design and decorate (15 minutes)
- Part 2: the pieces and the thickness (15 minutes)
- Part 3: will it stand? (15 minutes)
- A coding turn: candy by code (ages 10 and up, 15 minutes)
- A making turn: a real house (ages 7 and up, one more period)
About this lesson
One lesson, three parts. Students design a house and decorate it. Then they read the pieces it is cut from, and change the dough thickness to see which pieces change. Then they test their house against the rules of thumb on the Kitchen bench.
Everything you are asked to say or point at is written here in the words that are on the screen. The lesson only uses what it has already taught.
How to read this guide
- Say what to tell the class, in a sentence or two. Use your own words if you like.
- Students do the steps, in order. Read them out or put them on the board.
- Screens should show what you see when you walk round the room and the step worked.
- What goes wrong the usual problems, and the fix.
- Ask one question to check the idea, not the clicking.
Part 1: design and decorate (15 minutes)
- Say A gingerbread house is flat pieces glued together with icing. Today you design one, and the lab works out the pieces.
- Students do Pick a house on the Style bench. On the Shape bench, slide Wall height and Roof pitch. Open the Candy & icing bench, pick a candy and a color, and tap the house. Then press Icing bag and drag along a wall to pipe a line. Press Night above the stage.
- Screens should show A house with candy on it and a line of icing. At night the room is dark and the windows glow.
- What goes wrong A drag turns the house instead of putting candy on: the press missed the house, or Nothing is picked in your hand. To turn the house while holding candy, drag on the empty stage.
- Ask Which pieces of your house are the same shape? How can you tell from the screen?
Part 2: the pieces and the thickness (15 minutes)
- Say The side walls stand between the front and the back. So they are shorter than the house is deep. By how much depends on the dough.
- Students do On the Shape bench, set Dough thickness to 4 mm. Open the Export bench and press Make it under A template to cut real gingerbread. Find Side wall on the first page and write down its size. Set Dough thickness to 8 mm and make the template again.
- Screens should show Two PDFs. The first page lists every piece with its size and how many to cut. The side wall is 8 mm shorter in the second one.
- What goes wrong The PDF opens on a page of pieces, not the list: scroll to page 1. The size did not change: the slider was moved after the PDF was made, so make it again.
- Ask The side wall got 8 mm shorter when the dough got 4 mm thicker. Why 8 and not 4?
Part 3: will it stand? (15 minutes)
- Say Bakers have rules of thumb. The Kitchen bench has four. The numbers in them are guesses: you can test them and change them.
- Students do Open the Kitchen bench. Read how many baking pans your house needs. Open Will it stand? and press Test it. Then make the roof as steep as it goes, set the roof rule to 60 degrees, and test again.
- Screens should show A list under Test it. A rule that passes says Stands. A rule that fails says Falls and names the pieces, and those pieces turn red on the house while it shakes.
- What goes wrong Nothing turns red: no rule is broken, or the rule is switched off with its checkbox. The red goes away when the house changes: that is on purpose, test again.
- Ask Your rule says a steep roof slides off. How could you find out whether 60 is the right number?
A coding turn: candy by code (ages 10 and up, 15 minutes)
Candy by code is on the Candy & icing bench, folded under its heading. A place on a wall is two numbers from 0 to 1: across, then up its box. On a pointed front or back, places high up near the sides are in the air, so this turn uses a side wall.
- Say A loop runs the same line many times. Each time, a number counts up. We will use it to put a row of gumdrops along a side wall.
- Students do Open Candy by code. Type these lines, then press Run: for i from 1 to 8, then candy gumdrop red on left at i/9 0.1, then end. Each goes on its own line.
- Screens should show Eight red gumdrops in an even row along the bottom of the left wall. Running again puts the row back where the code says.
- What goes wrong Line 1: This for has no end means the end line is missing. A word the lab does not know is named, with its line number and the words it does know.
- Ask What does i/9 give when i is 1, and when it is 8? What would change if you wrote i/5?
A making turn: a real house (ages 7 and up, one more period)
The Export bench prints the template, with the cut list and a kitchen page, or a cut file for a laser cutter or a craft cutter. For cardboard, set Dough thickness to the cardboard's thickness first. The thinnest setting is 3 mm, so use corrugated cardboard or foam board.
- Say The template is the size the lab says, never shrunk to fit. If you print it at actual size, the pieces fit.
- Students do Print the template at actual size. Measure the 100 mm line on the first page. Cut out the pieces. Build in the order on the first page: the front and one side, the other side, the back, then the roof.
- Screens should show Pieces that meet at the corners. The side walls fit between the front and the back.
- What goes wrong The 100 mm line measures less: the printer shrank the page to fit. Print again with actual size or 100% chosen. A joint does not meet: the material is thicker or thinner than the thickness set in the lab.
- Ask Which joint was hardest to hold while the icing or glue set, and why that one?
More help
Is something on this page wrong or not clear? Write to us.
Page last reviewed October 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.