Papercraft Maker teaching notes

For teachers, co-op leaders and parents. In about one period students turn the starter house into a model of their own and print it; cutting, folding and gluing it may take part of a second period. Each part says what to say, what students do, what their screens should show, what usually goes wrong, and a question to ask. A section at the end covers paper, printing and the surface area math.

Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Fold it in your head first. Before anyone presses Unfold, each student sketches what they think the flat piece of one part looks like, tabs left out. Then Unfold, compare, and talk about which sketches would also have folded into the same shape.

Set up a free class Share to Google Classroom
Put this on your class site

Students can use Papercraft Maker right on your page, with no account. What they make stays on that page; to keep their work, they make a free account.

Google Sites: Insert, then Embed, then By URL, and paste this address.

https://mytekdev.com/try/papercraftmaker?embed=1

Canvas, a blog, or any page that takes HTML: paste this code where you edit the page as HTML.

<iframe src="https://mytekdev.com/try/papercraftmaker?embed=1" width="100%" height="640" style="border:0" allow="fullscreen" title="Papercraft Maker demo from mytekDev"></iframe>

About this lesson

Part 1 looks at the starter house and unfolds it. Part 2 makes the model their own. Part 3 prints it, and part 4 builds it. The times are estimates: a model with small pieces takes longer to cut than one with big ones.

Everything you are asked to say or point at is written here in the words on the screen. The tabs on the right are Make, Parts, Size, Faces, Joins and Print. The box on the stage is called Will it build?: a red line in it must be fixed before printing, and an orange line makes the model better.

Before you start. Print one sheet yourself to check the printer: in Chrome's print window, Scale must say Default (or Custom 100), and the 1 inch square on the sheet should measure an inch. Have scissors and a glue stick or tape for everyone. Plain paper is fine for a first model.

How to read this guide

  1. Say what to tell the class, in a sentence or two. Use your own words if you like.
  2. Students do the steps, in order. Read them out or put them on the board.
  3. Screens should show what you see when you walk round the room and the step worked.
  4. What goes wrong the usual problems, and the fix.
  5. Ask one question to check the idea, not the clicking.

Part 1: unfold the house (5 minutes)

  1. Say This paper house is made of two parts: a box and a roof. Each part prints as one flat piece. Let's see what the pieces look like.
  2. Students do Drag the house to turn it. Press Unfold under the stage, and look at the two flat pieces. Press Fold, and watch them fold back into the house.
  3. Screens should show Two flat pieces on the table, each with gray tabs along some edges, then the house standing again.
  4. What goes wrong A student drags and the house spins away: press Reset view, at the top left of the stage.
  5. Ask Which edge of the flat box piece became the top edge of the front wall?

Part 2: make it yours (20 minutes)

  1. Say Change the house into something of your own, or start from another model under Make. Every face you decorate prints on the outside of the paper.
  2. Students do Under Make, keep the house or pick the robot, owl, car, rocket or blank box. Click a face on the model, then use Faces to give it a color, a pattern, a sticker or a few words. Use Size to change a part, Parts to add or remove one, and Joins to say where a part sits.
  3. Screens should show Their own model on the stage, and Ready to print. in Will it build?, or only orange lines.
  4. What goes wrong "too small to cut out" in red: a face is less than an inch across; make that part bigger in Size. "too big for one sheet of paper": make it smaller. "This needs more than two sheets of paper.": make a part smaller or take one away. "is not glued to anything" in orange: pick where it sits in Joins. A round part that will not fit: a tall round part's piece is too long for the sheet; make it shorter or narrower.
  5. Ask Press Unfold. Is that the flat piece you expected for your new part?

Part 3: print it (5 minutes)

  1. Say The print is at true size, so the paper model will be exactly as big as the sizes you chose.
  2. Students do Open Print. Leave Colors on Light unless you want full color. Press Print. In the print window, Scale must say Default (or Custom 100). Then measure the 1 inch square on the sheet.
  3. Screens should show One or two sheets with pieces outlined in solid lines, dashed fold lines, gray numbered tabs, and a gray patch where another part is glued on.
  4. What goes wrong The square is smaller than an inch: Scale was set to Fit to page; print again with Default or Custom 100. Print is grayed out: there is a red line in Will it build? to fix first.
  5. Ask Why does the sheet tell you to measure the square before you cut?

Part 4: build it (one period or more)

  1. Say Cut on the solid lines and keep the gray tabs on. Fold every dashed line away from you. Each tab has a number: glue it under the edge with the same number.
  2. Students do Cut out every piece. Fold every dashed line away from the printed side, so the printing stays outside. Glue each tab under the edge with its number, one at a time, and close the last face slowly. Then glue each part onto its gray patch.
  3. Screens should show On the desk, the model from the screen, with its decorations outside and no tabs showing.
  4. What goes wrong A tab got cut off: tape the edge instead. The printing ended up inside: the piece was folded toward the student; unfold it and fold the other way. The last face will not close: glue the tabs before it first, then press the last face down from inside with a pencil. Small pieces, like the robot's arms, take the longest; tape is easier than glue on them.
  5. Ask Hold the model next to the screen. What is different between them, and why?

Paper, printing and the math

Show the math, in the Print tab, writes each face's area on the print and lists the surface area and volume of each part. Below the list it gives two numbers for the whole model: the outside of the model, and all the paper. They are different because a part glued on hides its own bottom and the patch it covers, and the tabs are hidden inside.

For grade 6 nets and surface area: have students print with Show the math off, measure the faces on the paper and add up the areas themselves, then turn it on to check. The box, roof, wedge and pyramid are made of rectangles and triangles; the round part's ends have eight sides.

More help

Is something on this page wrong or not clear? Write to us.

Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.