Printing Press Lab teaching notes
For teachers, co-op leaders and parents. One period of about forty-five minutes takes students from their first proof to a broadside with a headline they set by hand, backward and upside down, the way a colonial print shop did. Each part says what to say, what students do, what their screens should show, what usually goes wrong, and a question to ask. A history section covers the night of July 4, 1776 and the movable type that came before it, and a last part covers the stamp sheet.
Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Proof, fix, print. Each student sets a short headline and pulls a proof without the Mirror. Partners swap screens, read the proof, and say what is wrong before the setter looks at the red rings. Then the setter fixes the stick and pulls a clean proof, the way Dunlap's shop did on July 4.
Set up a free class Share to Google Classroom- About this lesson
- How to read this guide
- Part 1: the first proof (10 minutes)
- Part 2: set your own headline (20 minutes)
- Part 3: proof, fix, print (15 minutes)
- The history behind it
- A second session: the stamp sheet
About this lesson
The period has three parts: the first proof, setting a headline of their own, then proof, fix and print. The stamp sheet is a second session, with craft foam and scissors.
Everything you are asked to say or point at is written here in the words on the screen. The two trays on the left are the cases. The row of words under the stick is the shop's steps: Set, Lock up, Ink, Pull. The box at the top right is Read the proof: a red line must be fixed before printing, and an orange line is something to look at.
How to read this guide
- Say what to tell the class, in a sentence or two. Use your own words if you like.
- Students do the steps, in order. Read them out or put them on the board.
- Screens should show what you see when you walk round the room and the step worked.
- What goes wrong the usual problems, and the fix.
- Ask one question to check the idea, not the clicking.
Part 1: the first proof (10 minutes)
- Say This is a print shop in 1776. Every letter is its own small piece of metal, and the shop has already set a word in the stick. Pull a proof: a proof is a test print.
- Students do Press Pull a proof under the stick. Read the proof and the line in Read the proof. Find that letter in the stick, click it to turn it, and press Pull a proof again.
- Screens should show The press moving, then a proof that reads NOTICE with the T upside down and ringed in red, and "A piece of type is upside down." After the fix, a clean proof.
- What goes wrong The app opened on something other than NOTICE: press Starters and pick Notice. A student cannot find the T in the stick: every letter there is upside down and backward, so it reads ECITON from the right; press Mirror to see it the right way around. Each piece has a groove, the nick: the turned T has its nick at the bottom.
- Ask Why is every letter in the stick backward and upside down?
Part 2: set your own headline (20 minutes)
- Say Now you are the compositor. Type what you want to print, then set it one piece at a time.
- Students do Press Starters and pick Blank. In The headline box on the right, type a short headline, 3 to 12 letters. Click a box in a case to pick up a piece of type, read the words by your hand, then click the stick. Do this for every letter. If the words say "Nick down", click the piece in your hand to turn it before it goes in. When Read the proof says the line is loose, press Fill the line.
- Screens should show The headline growing in the stick, backward and upside down, and "The line is loose in the stick" in red until Fill the line puts blank pieces at the ends.
- What goes wrong A student cannot find a letter: Labels at the top of the cases names every box. The cases follow an English printing handbook of 1771, so some things are not where a keyboard would put them: k is in the upper case. A letter went in the wrong place: each piece in the stick has a small × to take it out, and clicking the stick with a piece in your hand puts it in on the side you click. "The line is too long for the stick": take a letter out or use a shorter word; M and W take the most room.
- Ask How long did your headline take? The Declaration of Independence was about 7,800 letters and spaces. How long would it take you?
Part 3: proof, fix, print (15 minutes)
- Say Pull a proof and read it like an editor. Anything that is wrong gets fixed before the real printing.
- Students do Press Pull a proof. Read the proof and every line in Read the proof; click the proof to see it bigger. Fix the stick and pull another, until it is clean or you choose to keep it. Then press Print, pick The broadside, and print it.
- Screens should show Mistakes ringed in red on the proof, or a red mark where a letter or a space is missing, and a line for each: a letter that is not the one you wrote, a missing letter, a piece too many, a piece upside down, two words run together. Then a clean proof and the broadside.
- What goes wrong The proof is clean but the word is wrong: Read the proof checks the stick against The headline box, so a typo in the box is printed faithfully; fix the box. "Take out personal information": a phone number, an email, a street address or a link does not belong on a broadside. The printed sheet is small or cut off: Scale in the print window was not Default or Custom 100.
- Ask Some copies of the Dunlap broadside have broken letters and words fixed during printing. Why might a shop print with mistakes in it?
The history behind it
On the evening of July 4, 1776, John Dunlap's shop in Philadelphia set the Declaration of Independence in type. The shop pulled a proof, corrected it, and printed about 200 copies by morning. They are called the Dunlap broadsides, and 26 are known to survive. The work was done in a hurry, and it shows: on some copies the page sits crooked, some letters are broken, and words were corrected while the printing was still going on. Proof, fix, print is what that shop did that night.
Movable type is older than that shop. In China, Bi Sheng made movable type from fired clay in the 1040s. In Korea, the book called Jikji was printed with movable metal type in 1377, seventy-eight years before the Gutenberg Bible. In Mainz, around 1450, Johannes Gutenberg is credited with a way to cast metal type in large numbers, an oil-based ink, and a press adapted from the screw presses used for wine and olives. "Credited with", because scholars still argue over the details.
Words from the print shop: upper case and lower case come from the two cases of type, capitals in the upper one and small letters in the lower one; that one is well recorded. Out of sorts is often said to come from a printer running out of pieces of type, which were called sorts; that is disputed. Mind your p's and q's is a story people tell about printers, because a p and a q look alike backward; word historians have found no use of the saying in printing, so treat it as a story, not a fact.
A second session: the stamp sheet
The stamp sheet prints the headline's letters backward, in numbered rows, to cut out of craft foam. It shows by hand why type has to be backward. Each student needs a sheet of craft foam, scissors, a glue stick, a strip of cardboard for each row, and a stamp pad or a washable marker.
- Students do Press Print, pick The stamp sheet, and print it. Tape it on craft foam. Cut on every dark edge, through the paper and the foam. For a hole, like the middle of an O, pinch the foam to fold it across the hole, snip a small cut in the middle, then cut around the hole from there. Mark each letter's top with pencil as you cut it out. Glue the letters on a cardboard strip, pencil side up, in the order of the small numbers, one strip per row. Ink them and press the strip on paper.
- Screens should show On paper: the headline printed the right way around, from letters that read backward on the strip.
- What goes wrong A word prints backward: a letter was glued pencil side down, or the letters were glued in reading order instead of the sheet's order. Thin parts of letters tear: cut slowly and turn the foam, not the scissors.
- Ask Your strip reads backward, and it prints forward. Why?
More help
Is something on this page wrong or not clear? Write to us.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.