Free · no signup to try · nothing to install

Automaton Maker

An automaton is a toy that moves when you turn a handle. Inside the box, the handle turns a cam, a flat shape with its hole off center, and the cam's edge pushes a stick up and lets it fall. Automaton Maker opens on a finished frog on top of a small box. Drag the handle round, or press Turn it, and the frog sits still for half a turn, rises, and drops back. Beside it, How it moves draws the frog's height over one turn, with the wait, the rise and the fall marked. Every part is the student's to change: the cam's shape, its size and lift, the follower, the figure and the scene. Then Print the kit gives every piece at true size, with the lengths to cut and the steps, to build a toy that moves the way the screen showed.

This is the whole app with the Frog loaded. Press Turn it, then pick another shape on the Cam tab and watch the graph change. Printing the kit works without an account.

Open it full screen

Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Predict, then turn. Before a student turns the handle on a new cam, they say out loud what the figure will do: wait, rise, fall or drop, and how many times in one turn. Then they press Turn it and read the graph. A correct prediction earns the right to print.

Set up a free class Share to Google Classroom
Put this on your class site

Students can use Automaton Maker right on your page, with no account. What they make stays on that page; to keep their work, they make a free account.

Google Sites: Insert, then Embed, then By URL, and paste this address.

https://mytekdev.com/try/automatonmaker?embed=1

Canvas, a blog, or any page that takes HTML: paste this code where you edit the page as HTML.

<iframe src="https://mytekdev.com/try/automatonmaker?embed=1" width="100%" height="640" style="border:0" allow="fullscreen" title="Automaton Maker demo from mytekDev"></iframe>

What a student actually does

They open the app on a finished toy, the Frog, and turn the handle by dragging it, or press Turn it and watch it go round until they press Stop. How it moves draws the figure's height over one turn, with a dot that follows the handle and words on the line: wait, rise, fall, and drop when a fall is sudden. Clicking the graph moves the handle to that point.

On the Cam tab they pick a shape: Bob, a circle with its hole off center that rises and falls smoothly; Wait, an egg that sits still for about half a turn; Jump, a snail that creeps up and drops all at once and only works turned one way; Two bumps; or Three bumps. Size and Lift change it in quarter inches. On the Follower tab, Straight pushes the stick straight up, and Spin sets the stick to one side so the figure slowly turns around as it bobs. The Figure tab puts a frog, bird, fish, rocket, ghost, flower, jack-in-the-box or whale on top; the Box tab paints a scene on the front and adds a name plate.

Will it move? watches the toy as they change it: a red line for a snail cam turned the wrong way, which jams, a cam that would hit the box, or a stick that would fall out of its straw; an orange line for a lopsided cam, bumps too shallow for the follower to feel, or a figure wider than the box. Clicking a line says why.

Print the kit makes three pages of letter paper: the cam three times, to glue in a stack, the follower disc three times with two marks for pennies, the figure front and back, the handle, the axle stops, the frame, and lines showing exactly how long to cut the skewers and the straw. The frame can be a fold-up frame printed on cardstock or templates to tape on a cereal box. The steps are printed in the order a student can do them.

What they are learning while they make it

Nothing here is presented as a lesson. This is what the activity is made of.

What the student doesWhat it is
Turns the handle and reads the graph Motion with a pattern. The cam goes round the same way every turn, so the figure's motion repeats. The graph shows that pattern, and it predicts what the paper toy will do.
Swaps an egg cam for a snail and watches the graph change Form decides motion. The cam's shape is the motion. A circle bobs, an egg waits, a snail creeps up and drops. Changing the shape is changing what the machine does.
Turns a snail cam backward and sees it jam Why some machines only go one way. A snail's sudden step lets the follower drop one way round, but turned the other way the step runs straight into it. Real mechanisms have the same limit.
Picks Two bumps and finds the figure barely moves A flat follower and its limits. A flat disc rests on the highest part of the cam under it, so it rides over shallow dips. The graph shows the motion it loses, and the check says why.
Compares two cams for the motion the figure should have Comparing design solutions. A frog should wait and hop; a bird should bob. Trying cams on screen against what the figure should do is comparing solutions before building one.
Builds the paper toy and finds what sticks or wobbles A model and the real thing. On screen nothing bends or rubs. Paper does. Finding what the model left out and fixing it is how engineers use a model.

How to tell whether it landed

Ask, and let them show you. A student who has understood it can answer these without help.

Use it in your subject

Not a technology class? Then the app is how students show what they learned in your unit. More projects for every subject.

Science, grade 3

NGSS 3-PS2-2: make observations and/or measurements of an object's motion to provide evidence that a pattern can be used to predict future motion. The cam repeats every turn, the graph shows the pattern, and the toy follows it. This app addresses it.

Engineering design, grades 3 to 5

NGSS 3-5-ETS1-2: generate and compare multiple possible solutions to a problem based on how well each is likely to meet the criteria and constraints. Comparing cams on screen against the motion the figure should have addresses it. The build partially addresses 3-5-ETS1-1 and 3-5-ETS1-3.

Engineering design, grades 6 to 8

Partially addresses MS-ETS1-4 (develop a model to generate data for iterative testing and modification) and MS-ETS1-2: the simulator is the model, and the paper toy is the test. Not claimed: 4-PS3-4, since a hand crank turns motion into motion and that standard is about converting energy from one form to another.

Art and making

A moving sculpture: the figure, its scene and its motion together tell a small story, which the Exploratorium found learners care about as much as the mechanism.

Practical notes

For co-ops, microschools, and classrooms

Make a moving parade: each student builds a toy with a different cam, and the class lines them up and turns the handles together, then sorts them by motion: the ones that wait, the ones that bob, the ones that drop. The Exploratorium's Tinkering Studio runs cardboard automata the same way in its classroom activity, and this app follows its build: a box, a cam on an axle, a follower on a stick, and a figure on top.

Common questions

Is Automaton Maker free?

Yes. It runs in your browser and there is no paid tier. A free account adds saving. Printing the kit works without one.

What does a student need to build it?

The printed kit, two bamboo skewers, a drinking straw, white glue and a glue stick, tape, two pennies, scissors, a ruler, a sharp pencil and an eraser or a lump of clay to push into. Cardstock is best for the pieces, and a cereal or tissue box can be the frame. No hot glue and no knives.

How do I print it at the right size?

Press Print the kit. In Chrome's print window, under More settings, Scale must say Default (or Custom 100). Then measure the 1 inch bar on the page with a ruler. If it is not an inch, print again.

Is it safe for younger students?

The kit has no step that needs a knife or hot glue. A grown-up cuts the skewers and snips off the sharp points, and holes are started with just the tip of a pencil into an eraser or clay. Younger students may need a grown-up to start the holes.

Why does my toy stick or wobble when the screen did not?

On screen nothing bends or rubs. Real paper is softer. Check that the straw goes only about 1/4 inch into the box, that the two pennies are on the follower so it falls back down, and that the cam is glued to the axle once it moves right. If the cam slips later, wrap tape around the axle beside it.

Can students design their own cam shape?

Not by drawing. They pick one of five shapes and set its size and lift, which covers the motions the classroom version uses: a smooth bob, a wait, a slow rise and drop, and two or three bumps.

Still have a question? Ask us, and a person will write back.

Where to go next

Start with Automaton Maker

Trying it costs nothing and takes about five minutes. An account is what makes the work last.

Automaton Maker is one of the making apps on the platform. It is a place to make things, not a course, and it is not a substitute for a teacher: it is at its best when an adult asks students to predict the motion before they turn the handle.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.