Automaton Maker teaching notes

For teachers, co-op leaders and parents. In the first period students pick a cam, predict and read its motion on a graph, and print a kit. In the second they build a cardboard toy that moves when they turn the handle. The build follows the cardboard automata activity of the Exploratorium's Tinkering Studio: a box, a cam on an axle, a follower on a stick, and a figure on top. Each part says what to say, what students do, what their screens should show, what usually goes wrong, and a question to ask.

Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Predict, then turn. Before a student turns the handle on a new cam, they say out loud what the figure will do: wait, rise, fall or drop, and how many times in one turn. Then they press Turn it and read the graph. A correct prediction earns the right to print.

Set up a free class Share to Google Classroom
Put this on your class site

Students can use Automaton Maker right on your page, with no account. What they make stays on that page; to keep their work, they make a free account.

Google Sites: Insert, then Embed, then By URL, and paste this address.

https://mytekdev.com/try/automatonmaker?embed=1

Canvas, a blog, or any page that takes HTML: paste this code where you edit the page as HTML.

<iframe src="https://mytekdev.com/try/automatonmaker?embed=1" width="100%" height="640" style="border:0" allow="fullscreen" title="Automaton Maker demo from mytekDev"></iframe>

About these lessons

Period 1 has three parts: see how the Frog moves, try other cams, then pick one for a figure and print the kit. Period 2 is the build, in the order the printed steps give. The build time is an estimate: plan on one or two periods for a first build.

Everything you are asked to say or point at is written here in the words on the screen. The graph is called How it moves. The box at the top right is called Will it move?: a red line in it must be fixed before printing, and an orange line makes the toy better. Clicking a line says why.

Before you start. Print one kit yourself and look at the pages. Have cardstock in the printer if you can, plain paper if not. For the build, each student needs two bamboo skewers, a drinking straw, two pennies, white glue, a glue stick, tape, scissors, a ruler, a sharp pencil and an eraser or a lump of clay. A grown-up cuts the skewers.

How to read this guide

  1. Say what to tell the class, in a sentence or two. Use your own words if you like.
  2. Students do the steps, in order. Read them out or put them on the board.
  3. Screens should show what you see when you walk round the room and the step worked.
  4. What goes wrong the usual problems, and the fix.
  5. Ask one question to check the idea, not the clicking.

Period 1, part 1: how does it move? (10 minutes)

  1. Say This is an automaton, a toy that moves when you turn a handle. Inside the box is a cam, a flat shape with its hole off center. Turn the handle and watch the frog and the graph beside it.
  2. Students do Drag the handle round, or press Turn it, then Stop. Read How it moves. Click a point on the graph.
  3. Screens should show The frog sitting still for about half a turn, then rising and falling. The graph flat, then a hill, with the words wait, rise and fall on it, and a dot that follows the handle. Clicking the graph moves the handle there.
  4. What goes wrong Turn it keeps turning: that is right, press Stop. The camera turns instead of the handle: drag the handle itself, the round knob on the side.
  5. Ask Point to the part of the graph where the frog waits. What is the cam doing then?

Period 1, part 2: the shape is the motion (15 minutes)

  1. Say Before you turn it, say what the figure will do. Then turn it and read the graph to see if you were right.
  2. Students do On the Cam tab, pick Bob, then Wait, Jump, Two bumps and Three bumps. For each one, predict, then press Turn it. With Jump, find Turn the handle and pick the other way.
  3. Screens should show Bob: one smooth hill. Wait: flat, then a hill. Jump: a slow ramp, then a drop. Two bumps and Three bumps: two or three hills. Jump turned the other way: It jams turned this way, in red.
  4. What goes wrong The follower rides over the dips, in orange, on Two or Three bumps: a flat follower cannot drop into a shallow dip; make the cam bigger, use less lift, or pick fewer bumps. That is a lot of lift for this cam: make the cam bigger or the lift smaller.
  5. Ask Why does a snail cam jam when you turn it the other way?

Period 1, part 3: pick one and print the kit (20 minutes)

  1. Say Pick a figure, then pick the cam that gives it the right motion. A frog hops, a bird bobs, a rocket climbs and drops. Then print the kit.
  2. Students do Pick a figure on the Figure tab and a scene on the Box tab. Choose a cam that suits it. Try Spin on the Follower tab if the figure should turn around. Press Print the kit, choose Fold-up frame or A box you have, and print. In Chrome's print window, under More settings, Scale must say Default (or Custom 100).
  3. Screens should show No red lines in Will it move?, then up to three pages with the steps, the lengths to cut, and every piece at true size.
  4. What goes wrong The 1 inch bar on the page is not an inch: Scale was changed; print again. This kit needs more than three pages: make the cam a size smaller, or print every page.
  5. Ask Which cam did you pick for your figure, and why that one?

Period 2: build it in the printed order

Students follow the steps on the first page in order. The order matters: the holes are made while the pieces are flat, and the stick goes up through the straw before the axle and cam go in.

  1. Say Follow the steps in order, one at a time. Do not glue the cam to the axle until the toy moves the way the screen showed.
  2. Students do Cut out every piece and crease the dashed lines. Make the holes while the pieces are flat. Build the frame, glue the cam layers and the follower layers, glue the follower to the stick and tape two pennies on it. Put the straw in the top and the stick up through it, then the axle and cam, then let the follower down onto the cam. Turn it, then glue the cam, the handle, the knob and the figure.
  3. Screens should show On the desk: a box with a handle on the side that, turned, makes the figure move the way the graph did.
  4. What goes wrong The follower does not fall back down: check the two pennies are on it and the straw goes only about 1/4 inch into the box. The stick wobbles: it needs the straw. The cam slips on the axle: wrap tape around the axle beside it. A snail cam jams: it was put on the wrong way round; the arrow on Cam 1 faces the handle's side. The frame leans: check the braces in the front corners.
  5. Ask What did your paper toy do that the screen did not show? Why?

Materials and safety

What the app cannot show. On screen nothing bends and nothing rubs, and the follower always falls. Real paper is softer, so a toy can stick or wobble. That gap is worth talking about: it is the difference between a model and the real thing.

More help

Is something on this page wrong or not clear? Write to us.

Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.