Birdhouse Lab teaching notes
For teachers, co-op leaders and parents. One lesson of about forty-five minutes, for grades three to eight. It ends with every student able to say why the size of the hole decides which birds can live in a box, and what else a box needs to keep the young birds safe. A building turn follows for classes that want one. Each part says what to say, what students do, what their screens should show, what usually goes wrong, and a question to ask. You do not need to know birds or woodworking.
Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Before anyone touches the Hole tab, ask the class what decides which bird can live in a box. Then each student makes the bluebird's hole one size bigger, reads what Who moves in? says, and makes it one size smaller. They write down which birds came and went, and the size where each one changed.
Set up a free class Share to Google Classroom- About this lesson
- How to read this guide
- Part 1: the birds and the box (10 minutes)
- Part 2: the hole decides (20 minutes)
- Part 3: break it, swap, fix it (15 minutes)
- A building turn: a real box (grades 4 and up, one more period)
About this lesson
One lesson, three parts. Students meet the birds and the box. Then they change only the hole and record which birds come and go. Then they break a box on purpose, swap seats, and fix their partner's box using only what the lab tells them.
Everything you are asked to say or point at is written here in the words that are on the screen. The panel over the box is called Who moves in? In it, a bird's picture is in color when the box suits it and gray when it does not.
How to read this guide
- Say what to tell the class, in a sentence or two. Use your own words if you like.
- Students do the steps, in order. Read them out or put them on the board.
- Screens should show what you see when you walk round the room and the step worked.
- What goes wrong the usual problems, and the fix.
- Ask one question to check the idea, not the clicking.
Part 1: the birds and the box (10 minutes)
- Say Some birds raise their young inside a hole in a tree. A birdhouse is a hole we build for them. Each kind of bird needs its own size.
- Students do Read Who moves in? at the bottom left of the box. Drag the box to turn it, and find the hole, the pole and the back board that runs down onto the pole. Then tap House Wren on the Bird tab, read the panel, and tap Eastern Bluebird again.
- Screens should show For the bluebird: "An Eastern Bluebird would move in." and under it "So could a Tree Swallow, a chickadee or a Tufted Titmouse." For the wren: a smaller box and "A House Wren would move in."
- What goes wrong The panel covers part of the box on a small screen: drag the box up or turn it. A student taps the box and lands on the Paint tab: tap Bird to go back.
- Ask The wren's box is smaller than the bluebird's. Why would a small bird want a small box?
Part 2: the hole decides (20 minutes)
- Say We will change one thing only: the size of the hole. Everything else stays the bluebird's. Write down who would move in at each size.
- Students do On the Hole tab, drag Hole size down to 1 1/8 in. Then move it up one step at a time to 1 5/8 in. At each size, write the birds in the panel and any line that appears. Tap a line to read why.
- Screens should show 1 1/8 in: a chickadee. 1 1/4 in: a chickadee or a Tufted Titmouse, and a gray line "House Sparrows can squeeze through a hole this size." 1 3/8 in: a Tree Swallow, a chickadee or a titmouse. 1 1/2 in: the bluebird and the other three. 1 5/8 in: "No bird would move in yet." and a red line "Starlings can get in and take the box."
- What goes wrong A student moves another slider by mistake and the table stops matching: press Put back the bird's numbers on the Box tab, then set the hole again.
- Ask At 1 5/8 inches no bird would move in, even though the hole is big enough for all of them. Why?
The point to land: a bigger hole does not help a bird. It lets in European Starlings, brought here from Europe, which take the box and push native birds out. The bluebird's 1 1/2 inches is the biggest hole that keeps starlings out.
Part 3: break it, swap, fix it (15 minutes)
- Say A box a bird moves into can still be a bad box. Make a box with one problem the lab warns about. Then swap seats and fix your partner's box.
- Students do Make one change: on the Hole tab press Perch, or on the Box tab press No under Let water out of the floor, or on the Place tab pick Fence, or on the Paint tab paint the walls black. Swap seats. Read the red line, tap it to read why, and fix the box.
- Screens should show Before the fix: the bird's name, then a red line "But the red lines below put the birds in danger." and the red line for the problem. After the fix: no red lines.
- What goes wrong A student fixes it with Undo instead of the tab: that works, but ask which tab they would have used. A gray line is a caution, not a danger, and can stay.
- Ask People put perches on lots of birdhouses. Why does the lab say a perch is a danger?
A building turn: a real box (grades 4 and up, one more period)
The Plans tab prints four pages: the wood to buy and the tools, every piece drawn on the board with a cut list, the entrance hole at its true size, and the steps. The bluebird box comes from one 6 foot 1x6 of untreated cedar or pine. An adult runs the saw.
- Say The plan is the real size. Print it at actual size, and the hole on page 3 is the hole you drill.
- Students do Print the plan at actual size. Measure the 4 inch line on page 3 with a ruler. Mark the pieces on the board as page 2 shows. An adult cuts them. Students drill the hole, sand the edges and screw the box together in the order on page 4.
- Screens should show Page 1 says "A 1x6 (really 3/4 by 5 1/2 in), at least" a length, "a 6 ft board". Page 3 has the hole circle and where its center goes.
- What goes wrong The 4 inch line measures short: the printer shrank the page to fit. Print again at 100%. A piece splits: drill a small pilot hole for every screw.
- Ask The plan says the hole is 7 1/2 inches up from the bottom of the front, but the lab said 6 1/2 inches above the floor. Who is right?
More help
Is something on this page wrong or not clear? Write to us.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.