Free · no signup · nothing to install

Birdhouse Lab

A birdhouse is a habitat with numbers. The size of the hole decides which birds can get in: an Eastern Bluebird needs 1 1/2 inches, and a hole a little bigger lets in starlings that take the box. Birdhouse Lab lets students design a nest box in 3D and tells them, as they go, which of six backyard birds would move in and why the others would not. Then it prints a plan to build the box from real wood: the board to buy, every piece laid out on it, and the hole at its true size.

This is the whole lab with a bluebird box loaded. Drag the box to turn it, pick another bird on the Bird tab, and change the hole on the Hole tab to see who would move in.

Open it full screen

Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Before anyone touches the Hole tab, ask the class what decides which bird can live in a box. Then each student makes the bluebird's hole one size bigger, reads what Who moves in? says, and makes it one size smaller. They write down which birds came and went, and the size where each one changed.

Set up a free class Share to Google Classroom
Put this on your class site

Students can use Birdhouse Lab right on your page, with no account. What they make stays on that page; to keep their work, they make a free account.

Google Sites: Insert, then Embed, then By URL, and paste this address.

https://mytekdev.com/try/birdhouselab?embed=1

Canvas, a blog, or any page that takes HTML: paste this code where you edit the page as HTML.

<iframe src="https://mytekdev.com/try/birdhouselab?embed=1" width="100%" height="640" style="border:0" allow="fullscreen" title="Birdhouse Lab demo from mytekDev"></iframe>

Homeschooling? A step-by-step kit uses Birdhouse Lab and ends with a certificate. See the kit

What a student actually does

They open the lab on a bare pine box with a slanted roof, on a metal pole with a baffle under it. It is the North American Bluebird Society's one-board box: a floor 4 by 5 1/2 inches, a 1 1/2 inch hole. A panel over the box, Who moves in?, already says an Eastern Bluebird would move in, and that a Tree Swallow, a chickadee or a Tufted Titmouse could too.

The Bird tab has six birds that use backyard nest boxes: the Eastern Bluebird, the Tree Swallow, the House Wren, the chickadee, the Tufted Titmouse and the White-breasted Nuthatch. Picking one puts that bird's numbers on the box. The Box, Hole, Roof, Paint and Place tabs change the floor, the inside height, the roof shape and slope, the hole's size and height, the paint on the outside, and where the box hangs and how high.

Every change runs the check again. A bird goes gray when its numbers no longer fit, and the panel says what to change to bring it back. Lines appear for the mistakes real birdhouses make: a hole big enough for starlings, a perch, no way for rain to drain, no air gap under the roof, no side that opens for cleaning, a dark or bright paint, a box on a fence or a pole with no baffle, a roof that hangs over the hole. Tapping a line says why.

Then the box leaves the lab. The plan is four printed pages: the wood to buy and the tools, every piece drawn on the board it is cut from with a cut list, the entrance hole at its true size to trace, and the steps to build it in order. A picture, a design sheet, a small model to 3D print and a 3D model for the other 3D apps are there too.

What they are learning while they play

Nothing here is presented as a lesson. This is what the activity is made of.

What the student doesWhat it is
Makes the hole one size bigger and watches the birds change Habitat and survival. Some organisms do well in a habitat, some less well, and some not at all. A box is a habitat, and each bird needs a hole, a floor and a height in its own range. The panel is that argument made with evidence: this box suits this bird, and here is why not that one.
Sees starlings and House Sparrows appear when the hole gets too big Competition and invasive species. European Starlings and House Sparrows were brought here from Europe and take nest boxes from native birds. The right hole size keeps starlings out. Sparrows squeeze through smaller holes, which is why people who keep bluebird boxes check them every week.
Turns off drainage or the air gap and reads why it matters Criteria and constraints. A good box has to do several things at once: keep the young birds dry, cool and out of reach, and open for cleaning. Each line in the panel is a criterion a real design is judged against.
Reads the plan's measurements in halves, quarters and sixteenths Measuring with fractions. Every size in the lab is in inches the way a tape measure reads them. The hole's height is measured two ways, from the floor inside and from the bottom edge of the front, and the difference is the floor's thickness plus its quarter inch gap.
Lays the pieces on one board in the plan Nets and real lumber. The box is its flat pieces laid end to end on a board. A board called a 1x6 is really 3/4 by 5 1/2 inches, so the plan works in real sizes, and a saw cut eats about an eighth of an inch between pieces.
Picks a mount and a height Predators and placement. Cats, snakes and raccoons climb trees and fences. A metal pole with a baffle under the box is the safest place, and each bird nests at its own height off the ground.

How to tell whether it landed

Ask, and let them show you. A student who has understood it can answer these without help.

Use it in your subject

Not a technology class? Then the app is how students show what they learned in your unit. More projects for every subject.

Science

Habitats and what organisms need from them (NGSS 3-LS4-3), and competition between native and introduced species (MS-LS2-2). Follow it with a real box and Cornell's NestWatch, where students report what nests in it.

Engineering and design

A design problem with criteria and constraints (3-5-ETS1-1 to 3, MS-ETS1-1): one bird's numbers, one board, a box that drains, breathes and opens. Compare two students' boxes for the same bird.

Math

Measuring to the quarter and the sixteenth of an inch, nominal and actual lumber, volume inside the box, and the box as a net of rectangles laid on a board (6.G.A.4).

Making

Build it. The plan gives the board, the cut list, a hole template at true size and the steps, for a class, a scout troop or a family on a Saturday. An adult runs the saw.

Practical notes

For co-ops, microschools, and classrooms

Make a bird trail. Each student designs a box for one bird, the group builds them from the plans, and the boxes go up around the school or the neighborhood at each bird's height. Register them with NestWatch and check them each week in spring. With a free account, students save their boxes and share them.

Common questions

Is Birdhouse Lab free?

Yes. It runs in your browser and there is no paid tier. A free account adds saving and sharing, but nothing on this page is behind a paywall.

Does my child need an account to try it?

No. The demo on this page is the complete lab with a bluebird box loaded. Make a free account to save a box and share it.

Where do the birds' numbers come from?

From Cornell's NestWatch, the North American Bluebird Society, Sialis.org, state wildlife agencies and Audubon. The sources do not all agree, so each bird has a range rather than one number. The hole's height is measured to its middle; some tables measure to its bottom or its top.

Will the plan build a real birdhouse?

Yes. It is laid out like the North American Bluebird Society's one-board plan: the floor sits a quarter inch up inside the walls, the front and the back cover the sides' edges, and one side swings on two nails for cleaning. Print it at actual size and check the 4 inch line before you trace the hole.

Can we 3D print a birdhouse?

The .stl is a small model to print. A real birdhouse is best built of wood: a thin plastic print would bake in the sun.

Is it safe for birds to paint it?

The lab lets students paint the outside and keeps the inside bare wood. It warns about dark colors, which overheat a box in the sun, and bright ones, which predators see from far off. Light, dull colors like tan or gray are the safe choice, or no paint at all.

What if a House Sparrow nests in it?

The lab says when a hole is big enough for House Sparrows. Only an adult who is sure it is a House Sparrow nest should take one out: the nests of native birds are protected by law, and no one should touch a nest with eggs or young birds in it.

Still have a question? Ask us, and a person will write back.

Where to go next

Badge kits and learning kits

Step-by-step projects in Birdhouse Lab that end with a certificate: for a scout badge, or for homeschool families and classes.

Start with Birdhouse Lab

Trying it costs nothing and takes about five minutes. An account is what makes the work last.

Birdhouse Lab is one of the making apps on the platform. It is a place to make things, not a course, and it is not a substitute for a teacher: it is at its best when an adult asks the questions above and takes the answers seriously.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.