Light Show Lab teaching notes
For teachers, club leaders and parents. In one period students watch the starter show, hang lights of their own, change the show block by block, and write a loop as a sentence. A second, optional period covers the watts and the bill, and the control box a real show runs on. Each part says what to say, what students do, what their screens should show, what usually goes wrong, and a question to ask. A section at the end lists what the app simplifies.
Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Which costs more? Before anyone opens the List tab, ask the class to guess what it costs to run this house's lights for a whole season, six hours a night for thirty nights. Then open List, read the cost in LED, and press Old bulbs.
Set up a free class Share to Google Classroom- About this lesson
- How to read this guide
- Part 1: watch the show (5 minutes)
- Part 2: hang the lights (10 minutes)
- Part 3: change the show (15 minutes)
- Part 4: write a loop (10 minutes)
- Part 5, a second period: the bill and the box
- What students often think
- What the app simplifies
- Standards
About this lesson
Part 1 watches the starter show and names its parts. Part 2 hangs lights. Part 3 changes the show on the timeline. Part 4 writes a loop in Sentences. Part 5, for a second period, is the List tab and the Box tab.
Everything you are asked to say or point at is written here in the words on the screen. The tabs are House, Lights, Yard, Song, Show, List and Box. The big button under the house is Play the show, and it turns into Stop while the show runs.
How to read this guide
- Say what to tell the class, in a sentence or two. Use your own words if you like.
- Students do the steps, in order. Read them out or put them on the board.
- Screens should show what you see when you walk round the room and the step worked.
- What goes wrong the usual problems, and the fix.
- Ask one question to check the idea, not the clicking.
Part 1: watch the show (5 minutes)
- Say Somebody programmed this house. Watch it once and count how many different parts of the house are doing their own thing.
- Students do Press Play the show and watch to the end. Then open the Show tab and play it again, watching the line move across the blocks.
- Screens should show The line under the house counting Bar 1 of 34 and the name of the section (intro, verse, chorus). In Show, a row called Everything and a row for the Roofline, Upstairs, Downstairs, Porch, Tree and Bushes, with colored blocks on them.
- What goes wrong No sound: the Sound button reads Sound off, or the computer is muted. The show starts in the middle: press Stop, then Back to the start.
- Ask What changes when the chorus starts at bar 19? How can you tell from the blocks before you press play?
Part 2: hang the lights (10 minutes)
- Say Make the house yours. Every bulb is drawn where a real one would hang, so the count on the screen is the number you would have to buy.
- Students do Open House and pick a home, or keep the two-story house. Open Lights, pick Big bulbs, Mini lights or Icicles and a color set, then tap a dashed line on the house. Tap it again to take the lights down. Try Candy cane or Frost to recolor the whole house at once. Open Yard and add one or two things to the lawn, then drag them where they should stand.
- Screens should show New lights on the house and the count of bulbs in the Lights tab going up. A message naming the part and how many bulbs went up.
- What goes wrong Nothing happens when they tap: the show is playing, so press Stop first. Icicles turn into another kind: icicles only hang from a roof edge, and the tip over the house says so. A yard thing lands in front of a bush: drag it. The Apartment has no yard.
- Ask The two-story house starts with 1,488 bulbs. Which part of the house has the most, and why?
Part 3: change the show (15 minutes)
- Say Each block is one instruction: this part of the house, do this, starting at this bar, for this long. The show is all the instructions in order.
- Students do Open Show. Click a block and change its look, for example from Twinkle to Chase, and its colors. Drag the block's right edge to make it longer or shorter. Click an empty spot in a row to add a block, and use Take this block out to remove one. Play from a few bars before the change to check it.
- Screens should show A panel naming the block, such as Roofline, bar 19 to 26, with the eleven looks as buttons. The house doing the new thing when the line reaches the block.
- What goes wrong A part of the house only twinkles slowly: it has no block at that bar, so it is resting. A change seems to do nothing: a block in the Everything row covers the whole house for those bars. Too much at once: the chorus should be the busiest part, so keep the verse calm.
- Ask Two blocks sit one above the other at bar 9. What does that mean the house does at bar 9?
Part 4: write a loop (10 minutes)
- Say The same show can be read as sentences. One sentence that says "every" can do the work of many blocks.
- Students do In Show, press Sentences. Read a few lines. At the end, type: every 2 bars from bar 9 to bar 16: the bushes, pop. Press Blocks and find what the line made. Go back to Sentences and change 2 to 4.
- Screens should show Under the box, a count of blocks and The show changed. In Blocks, the Bushes row with a block every two bars from bar 9 to bar 16, then every four.
- What goes wrong A message such as Line 12 with what it could not read: the line names a part this house does not have, or a look that does not exist. Use the names in the other lines. The blocks did not change: one line still has a mistake, and nothing changes until every line reads.
- Ask How many blocks did your one line make? What would you have to do to make them one at a time?
Part 5, a second period: the bill and the box
- Say Could you really plug this in? And what would it take to make real lights do this?
- Students do Open List and read the watts and the cost of a season. Press Old bulbs and read them again, then click the line near the play button that warns about plugs. Change the hours a night. Then open Box. Press Test the ports and watch each wire light its part of the house. Press I will wire it, click Roofline 61 on port 1 and press Unplug, then play the show. Plug it back in by picking a port and tapping the roofline lights on the house.
- Screens should show In List, for the starter house: In LED 208 watts and In old bulbs 1,394 watts, each with a cost. In Box: eight ports, six of them in use, and after Unplug a warning that reads Not plugged in: Roofline, with the roofline dark while the rest of the show runs.
- What goes wrong The watts in Box do not match the watts in List: they are different kinds of lights. List counts plain sets from a store, and Box counts pixels, the kind a real show uses. A chase runs backwards after plugging in: the wire went into the far end, which is the lesson. Select the run and press Feed the other end.
- Ask The roofline went dark but the music and the rest of the house carried on. What does that tell you about how the controller talks to the lights?
What students often think
- "The lights listen to the music." They do not. Nothing in the show hears anything. Each block was placed on a bar by a person, which is also how real shows are made.
- "More lights always cost a lot more to run." In LED the whole starter house draws about as much as two old light bulbs. The kind of bulb matters far more than the count.
- "Each string of lights has its own remote control." In a real show one controller sends every color to every bulb, many times a second, down a few wires.
- "If the lights are dark, they are broken." In the Box tab a dark run usually has no data or no power, and the bulbs are fine. Finding out which is the job.
What the app simplifies
- The watts, set lengths and plug limits are typical ones for store-bought lights, not any one brand. A real box has a tag, and the tag wins.
- The house is a drawing. Its feet are reasonable for a house of that kind, and a real roofline has to be measured.
- The List tab adds up watts. It does not model current flowing in a loop, so it is not a circuits lesson.
- A show has sequences, events and loops. It has no conditionals: nothing in a show says "if".
- At the Real level, the way voltage drops along a chain is a simple model with typical numbers. It is close on how many pixels one chain can carry and harsher than real life in the worst cases. An overloaded power supply is drawn dim; a real one blinks off.
- The three tunes are old songs that belong to everyone, played from notes by the page. Students cannot add their own music in this version.
Standards
- CSTA 1B-AP-10: programs with sequences, events and loops (Parts 3 and 4). The show has no conditionals.
- CSTA 1B-AP-11 and 2-AP-13: a problem broken into parts (the house as named runs). 1B-AP-12: modifying an existing program (the starter show). 1B-AP-15: testing and debugging (playing from the bar that looks wrong).
- CSTA 1B-CS-01 and 1B-CS-02: parts of a computing system working together (the Box tab). 1B-CS-03 and 2-CS-03: finding and fixing a problem step by step (unplugged runs and the fix-it houses).
- Common Core math 4.MD.A.2, 4.OA.A.3, 6.RP.A.3.b and 7.RP.A.2.c: feet and sets, a remainder that means one more set, cost per night, and cost as price times kilowatt-hours (the List tab).
- NGSS MS-ETS1-1 and MS-ETS1-2: the outlets, the circuit and the cost as constraints on a design. Supports 4-PS3-4.
More help
Is something on this page wrong or not clear? Write to us.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.