Plush Pattern Maker teaching notes
For teachers, club leaders and parents. In about one period students turn the starter cat into a plush of their own, print its pattern and tape the pages together. Sewing it takes several more periods. Each part says what to say, what students do, what their screens should show, what usually goes wrong, and a question to ask. A section at the end covers fabric, printing, safety and the numbers the app guesses at.
Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Bigger or smaller? Before anyone presses Show the pattern, ask whether the paper pattern for an 8 inch plush is bigger or smaller than 8 inches. Then look at the Body tab, which gives both sizes, and talk about why stuffing pulls the cloth in.
Set up a free class Share to Google Classroom- About this lesson
- How to read this guide
- Part 1: take the cat apart (5 minutes)
- Part 2: make it yours (20 minutes)
- Part 3: print and tape the pattern (15 minutes)
- Part 4: sew it (several periods)
- Fabric, printing, safety and the numbers
About this lesson
Part 1 looks at the starter cat and takes it apart. Part 2 makes the plush their own. Part 3 prints and tapes the pattern. Part 4 is the sewing, over as many periods as it takes. The times are estimates: more parts and a bigger plush take longer.
Everything you are asked to say or point at is written here in the words on the screen. The tabs on the right are Body, Ears, Arms, Tail, Face, Fabric and Steps. The box on the stage is called Will it sew?: a red line in it must be fixed before printing, and an orange line is something to know.
How to read this guide
- Say what to tell the class, in a sentence or two. Use your own words if you like.
- Students do the steps, in order. Read them out or put them on the board.
- Screens should show what you see when you walk round the room and the step worked.
- What goes wrong the usual problems, and the fix.
- Ask one question to check the idea, not the clicking.
Part 1: take the cat apart (5 minutes)
- Say This felt cat is sewn from flat pieces: two body pieces, a base, and two pieces for every ear, arm and the tail. Let's see them.
- Students do Drag the cat to turn it. Press Show the pattern under the stage and watch the pieces land on the pages. Press Stuff it to put it back.
- Screens should show The pieces lying flat on white pages, each inside a black cut line, the face piece on top; then the cat sitting up again.
- What goes wrong The cat spins away: press Reset view, at the top left of the stage.
- Ask Why are there two body pieces but only one base?
Part 2: make it yours (20 minutes)
- Say Change the cat into a creature of your own, or start from another one in the Body tab. Pick your fabric before you finish: it changes the pattern.
- Students do In Body, keep the cat or pick the Bunny, Monster, Penguin, Owl or Blank. Change the shape and the size. Use Ears, Arms and Tail to pick each part, its size, and Where it sits on the edge. In Face, pick the eyes, mouth and nose, and drag the face up or down on the plush. In Fabric, pick felt, fleece or cotton, and the colors.
- Screens should show Their own plush on the stage, and It will sew. in Will it sew?, or only orange lines.
- What goes wrong A red line saying two parts overlap: move one with its Where slider. "No room to leave an opening": move a part or take one off. "It needs" more than eight pages: make it smaller in Body. Thin parts get fatter when the fabric changes to fleece or cotton: that is on purpose, so they can be turned and stuffed.
- Ask Read the box under the Body sliders. How much bigger is the pattern than the plush, and why?
Part 3: print and tape the pattern (15 minutes)
- Say The pattern prints at true size across several sheets. Print the first page alone and measure it before printing the rest.
- Students do Press Print the pattern. Print page 1 only, with Scale set to Default, 100 or Actual size. Measure the 1 inch square. Then print the rest. Trim each page on its gray line at the right and the bottom, lay it over the next page so the crosses match, and tape it.
- Screens should show On the desk: a first page with the squares, the pieces and what to buy; the pattern pages taped into whole pieces; and a last page, Sewing it, in order.
- What goes wrong The square is smaller than an inch: the print was set to Fit to page; print again at 100. A piece does not line up across a join: a page was trimmed on the wrong side or not overlapped; match the crosses. Print the pattern says to fix the red lines first: there is a red line in Will it sew?.
- Ask Why measure the square before cutting any fabric?
Part 4: sew it (several periods)
- Say Follow the last page, one step at a time. Everything you mark goes on one body piece only: the face piece.
- Students do Cut the paper pieces out, pin them to the fabric and cut. Mark the notches on every piece, and the face, the part marks and the STOP marks on the face piece. Put the face on while it is flat. Sew the ears, arms and tail. Then follow the steps for the body, the base, stuffing and closing.
- Screens should show The Steps tab open beside the sewing, with the picture of where the parts go.
- What goes wrong The parts were sewn pointing out on fleece or cotton: on turned fabric they point in, toward the middle, and come out right when it is turned. The opening was sewn shut: the STOP marks were followed on the second piece; they belong to the face piece only. A thin part will not turn: push it through with the blunt end of a chopstick, from the tip. The base does not fit: match A, B and C first, then ease the curves between them.
- Ask Hold the plush next to the screen. Is it the size the app said, and if not, why not?
Fabric, printing, safety and the numbers
- Felt is the easiest first plush: it does not fray, it is cut on the line, and it is sewn with a whip or blanket stitch on the outside, through both layers. Nothing is turned, so parts can be as thin as half an inch. The 8 inch starters fit on 9 by 12 inch craft felt sheets.
- Fleece and cotton are sewn inside out on the dashed line, 1/4 inch in from the cut edge (3/8 inch when sewn by hand), then turned right side out. Parts are at least 1 inch wide in fleece and 3/4 inch in cotton so they can be turned. Fleece stretches most across its width; the grain arrow goes along the finished edge.
- Print the first page alone and measure the 1 inch square. Scale must be Default, 100 or Actual size. Each page repeats a gray strip of the one before: trim the gray line at the right and the bottom, lay it over, match the crosses, tape.
- Faces are stitched or felt by default, with no small parts. Safety eyes are a choice; the pattern then says not for children under 3 on its first page. Count needles out and in, keep pins in a cushion, and keep fabric scissors for fabric.
Three numbers in the app are estimates, not measurements, because no published source gives them: the narrowest part each fabric can be sewn and turned in, how much stuffing pulls the plush in (the app uses 0.9 up and down and 0.8 across), and the number of class periods to sew it. They are worded as guesses in the app.
More help
Is something on this page wrong or not clear? Write to us.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.