Snowflake Maker teaching notes
For teachers, club leaders and parents. In about one period students predict what a cut will do to folded paper, check it, find the lines of symmetry, and print a snowflake of their own to cut. Each part says what to say, what students do, what their screens should show, what usually goes wrong, and a question to ask. A section at the end covers paper, printing, scissors and the numbers the app guesses at.
Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Every student starts from the same uncut paper and makes one cut that touches no fold. Before anyone unfolds, they write down how many holes it will make. Then they unfold and count. Then they drag the same cut onto a fold and guess again. Why are there fewer holes now?
Set up a free class Share to Google Classroom- About this lesson
- How to read this guide
- Part 1: fold it back up (5 minutes)
- Part 2: one cut, a guess, a count (10 minutes)
- Part 3: lines of symmetry, six arms and eight points (10 minutes)
- Part 4: design one that holds, print it, cut it (20 to 25 minutes)
- For older students
- Real snow, and what the app leaves out
- Paper, printing, scissors and the numbers
About this lesson
Part 1 folds the starter snowflake back up. Part 2 is the heart of it: one cut, a prediction, and a count. Part 3 finds the lines of symmetry and compares two folds. Part 4 designs a snowflake that will hold together, prints it and cuts it. A last part is for older students. The times are estimates; cutting takes longer with more layers.
Everything you are asked to say or point at is written here in the words on the screen. Under the stage are Fold it up (it reads Unfold once the paper is folded), Show mirror lines and a Guess first switch. The tabs on the right are Fold, Tip, Cuts, Paper, Starters and Real snow. The box in the corner of the stage is called Will it hold?.
How to read this guide
- Say what to tell the class, in a sentence or two. Use your own words if you like.
- Students do the steps, in order. Read them out or put them on the board.
- Screens should show what you see when you walk round the room and the step worked.
- What goes wrong the usual problems, and the fix.
- Ask one question to check the idea, not the clicking.
Part 1: fold it back up (5 minutes)
- Say This paper snowflake was cut from one square of paper, folded small. Let's fold it back up and see how it was cut.
- Students do Press Fold it up and watch. Read the line under the stage.
- Screens should show The paper folding back one crease at a time, ending as a thin wedge with two dashed fold lines. Under the stage: 12 layers. Every cut goes through all of them.
- What goes wrong A student clicks the stage during the folding and it jumps to the end. That is fine; press Unfold and Fold it up to watch again.
- Ask How many layers of paper is the scissors going through?
Part 2: one cut, a guess, a count (10 minutes)
- Say Start from blank paper. You get one cut. Before you open it, write down how many holes it will make.
- Students do Open Starters and pick Uncut. Press Fold it up. Open Cuts and pick Round. Write the guess. Press Unfold and count. Then press Fold it up, drag the round cut so it sits on a dashed fold line, guess again, and unfold.
- Screens should show First: twelve round holes in a ring. Then, with the cut on a fold: six holes, each one wider, mirrored across the fold.
- What goes wrong The open paper is a square, not a snowflake. That is right: Uncut has no tip cut, so it opens back into the paper's own shape, and Will it hold? says so. Open Tip and pick Point to give it arms.
- Ask Why did the cut on a fold make fewer holes?
The answer they are reaching for: each layer is a mirror image of the one next to it, and a cut goes through every layer once. A cut that touches a fold is one cut through two layers joined at that fold, so it opens into one hole that is mirrored across the fold.
Part 3: lines of symmetry, six arms and eight points (10 minutes)
- Say A line of symmetry is a line you could fold the snowflake along so both halves match. Find them on yours.
- Students do Open Starters and pick Star. Press Show mirror lines and count them. Read the line under the stage. Then open Fold, pick Eight points, and unfold again. Count again.
- Screens should show Six arms: 6 mirror lines, and under the stage It matches itself 6 times in one full turn. Eight points: 4 mirror lines, and it matches itself 4 times.
- What goes wrong Students expect eight mirror lines from eight points. That is the point of the comparison: the eight-point fold makes long and short points that take turns, and only 4 lines carry each point onto one like it.
- Ask Real snow crystals have six arms. Which fold makes a snowflake more like real snow?
Guess first, the switch under the stage, turns the prediction into a game. Before the paper opens, two or three snowflakes appear and the student picks the one these cuts will make. One of the wrong ones is often the same cuts turned instead of mirrored, and the app says so when it is picked. That wrong answer is worth a class discussion: turning a shape and flipping it are different moves.
Part 4: design one that holds, print it, cut it (20 to 25 minutes)
- Say Now make your own. It has to hold together when it opens, or pieces fall out when you cut it. Will it hold? in the corner checks every cut.
- Students do Add cuts from the Cuts tab, drag them, and change their size and turn. Try a Branch on a fold for a side branch. Keep Will it hold? on Holds together. Then press Print, print at Actual size (100%), cut out the square, fold 1 first on the dark dashed line with the printed side out, follow page 2, and cut away the gray parts through every layer.
- Screens should show Holds together, with the number of cuts and mirror lines. On paper: a first page with the square and its gray cut lines, and a second page with the folding steps and a picture of what will open.
- What goes wrong Print says to fix Will it hold? first: a piece falls off (a cut runs right across the paper, marked on the stage) or a strip is too thin to cut (ringed in orange). Make the cut smaller or move it. Pages that print small: the print window was set to Fit to page; print again at Actual size and check the one inch square.
- Ask Before you open the real one, which picture on page 2 do you expect, and does it match?
For older students
- Count the moves that carry the six-armed snowflake onto itself: 6 turns (counting the full turn) and 6 flips, one across each mirror line. The eight-point fold has 4 of each. Which moves does the paper's folding make, and which come for free?
- Six big and small opens with 3 mirror lines and Simple with 2. Predict each before unfolding, from the number of layers.
- Draw your own cut on the Cuts tab, corner by corner. Can you draw half a shape on a fold so that it opens into a whole one, the way a paper heart is cut?
- The fold-and-cut theorem: Erik Demaine and colleagues proved that any shape made of straight lines can be folded flat so that one straight cut cuts out exactly that shape. A paper snowflake is the simplest case.
Real snow, and what the app leaves out
The Real snow tab draws six kinds of snow crystal (stellar dendrite, fernlike star, sectored plate, simple plate, column and needle) with their size and the temperature they grow near, after the snow crystal field guide by the physicist Kenneth Libbrecht. It says why snow has six arms: when water freezes, its molecules line up in a six-sided pattern.
What the app leaves out: every arm of an app snowflake matches perfectly. Real snow crystals are mostly lopsided or broken, because they bump into each other, stick together and snap as they fall. Perfect ones are rare. A paper snowflake is also far bigger: the tab says how many times wider than a real snow star, which is usually 2 to 4 mm across.
Paper, printing, scissors and the numbers
- Paper: Square comes in 6, 7 and 7.5 inches, cut from a sheet of printer paper. Letter folds a whole sheet, in half top to bottom first. Coffee filters are round, thin and easy to cut; for a filter, page 2 has a wedge to trace.
- Layers: Six arms is 12 layers, Eight points 8, Six big and small 6, Simple 4. For younger students and safety scissors, use Simple or Six big and small.
- Construction paper is hard to cut through 8 or more layers; the app warns. Will it hold? also asks for wider strips in tissue and construction paper than in copy paper.
- Printing: Actual size (100%), not Fit to page. Every layer of page 1 carries the same lines, so whichever side faces the student after folding, they cut on the lines they see.
- The numbers the app guesses at: the thinnest strip that survives scissors (about 1.5 mm through up to 8 layers of copy paper, 2 mm through 12, 2 mm in tissue and 3 mm in construction paper) are working values, not measured ones. If your class finds a strip the app passed tearing, tell us.
More help
Is something on this page wrong or not clear? Write to us.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.