Free · no signup · nothing to install

Ornament Lab

A round glass ornament is one outline turned round an axis. Change the outline and the ornament changes: pull the middle in and it gets narrower and holds less, draw the bottom out and it comes to a point. Ornament Lab lets students shape an ornament that way, decorate it, and then make the real thing: a paper ornament folded from several copies of its outline, two pieces that slot together, a dough or clay template at its real size, or a 3D print.

This is the whole lab with a red ball loaded. Drag the ornament to turn it. Pick another ornament on the Style bench, reshape it on the Shape bench, and put a name and the year on it on the Letters bench. Nothing is saved to us.

Open it full screen

Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Every student starts from the same ball and changes one slider at a time, writing down how much the ornament holds after each change (the line under the stage says it in milliliters). Which slider changes it most? Then they print the paper ornament with 6 pieces and with 12, and say which one is rounder and why.

Set up a free class Share to Google Classroom
Put this on your class site

Students can use Ornament Lab right on your page, with no account. What they make stays on that page; to keep their work, they make a free account.

Google Sites: Insert, then Embed, then By URL, and paste this address.

https://mytekdev.com/try/ornamentlab?embed=1

Canvas, a blog, or any page that takes HTML: paste this code where you edit the page as HTML.

<iframe src="https://mytekdev.com/try/ornamentlab?embed=1" width="100%" height="640" style="border:0" allow="fullscreen" title="Ornament Lab demo from mytekDev"></iframe>

What a student actually does

They open the lab on a shiny red ball and pick an ornament to start from: a teardrop, a finial with a long point, an onion, a bell with a clapper, an icicle with twisted ribs, an egg, a spinning top cut with flat faces, or a pickle, green and bumpy and a little bent, to hide deep in the branches. Or a flat star, snowflake, heart, tree or disc to cut from dough or clay.

On the Shape bench, sliders change the length, pull in the waist, draw the bottom to a point, add ribs and twist them, cut flat facets, raise bumps and bend it. Students can also drag the outline by hand, knot by knot, or write a rule for it, such as sin(t*180). They pick a finish (shiny glass, satin, matte, metal, glitter or frosted), a cap and a hook, ribbon or string, and can put a light inside: at night the glass glows and the letters on it show dark.

The Letters bench puts a name and the year on it, or shapes, letters, a drawing or a picture, and marks can also be written as code, with a loop that sets twelve dots round the ornament. The Paint bench colors each part with a color or a pattern. The Trim bench adds a band, two thin bands, beads round the middle or a tassel.

Then the ornament leaves the lab. A paper ornament prints as 6, 8 or 12 copies of its outline, folded and glued half to half until it closes into a round. Two pieces slot together at right angles, with slits as wide as the card or board is thick. A template prints at its real size to cut from rolled dough or clay. A 3D print comes out as two halves to glue, with no support needed, and a cut file goes to a laser cutter. A 3D model saved to the student's Files hangs on a tree in Christmas Tree Lab.

The red ball with the Waist slider pulled all the way in, to 60%: the middle drawn in like an hourglass, two round halves above and below. On the Shape bench, the finishes, caps, lights and hangers, and the sliders Length, Waist, Point, Ribs, Twist, Facets, Bumps and Bend. Under the stage: 66 mm across, 80 mm long, holds 189 mL.

One slider, Waist, all the way in. The lathe turns the new outline round the axis, so the whole ornament changes at once. The ball held 271 mL; this holds 189 mL. It is narrower too, 66 mm across instead of 80, because the widest part of a ball was its middle.

What they are learning while they play

Nothing here is presented as a lesson. This is what the activity is made of.

What the student doesWhat it is
Pulls the waist in and watches the ornament change all round Solids of revolution. A round ornament is one outline turned round an axis, the way glass is blown or wood is turned on a lathe. Change the outline in one place and the whole ring at that height changes.
Reads how much the ornament holds after each change Volume. The line under the stage gives the volume in milliliters, worked out from the shape. Pulling in the waist or drawing out a point takes away more than it seems to.
Writes sin(t*180) as the outline's rule, then changes the numbers Functions and graphs. t runs from 0 at the top to 1 at the bottom, and the rule says how far out the ornament is at each t. The outline is the graph of the function, turned round.
Prints the paper ornament with 6 pieces, then with 12 Approximation. Each piece is the outline, folded down the middle and glued to the next. More pieces, rounder ornament. A circle drawn as more and more straight sides works the same way.
Picks the material before printing the slot-together pieces Designing for a material. A slit has to be as wide as the card or board is thick, or the two pieces will not slide together. The lab cuts the slits for the thickness picked.
Writes a loop that puts twelve dots round the middle Loops and variables. for i from 1 to 12 repeats the line twelve times, and i/12 spaces the dots evenly round the ornament. A pattern no one could place that evenly by hand.
Bends a pickle and sees it tilt on its hook Center of mass. A bent ornament turns on its hook until its middle hangs straight under the loop it hangs from. The hook stays upright; the ornament tilts.

How to tell whether it landed

Ask, and let them show you. A student who has understood it can answer these without help.

Use it in your subject

Not a technology class? Then the app is how students show what they learned in your unit. More projects for every subject.

Math

Solids of revolution and volume with a reason to care: shape an ornament and read what it holds. Older students write the outline as a function of t and see its graph turned into a solid.

Art and design

Form, finish and pattern on a round surface, from glass ornaments to flat ones cut in dough or clay. Compare a pattern placed by hand with one placed by a loop.

Engineering and design

From a design to a made thing: fold the paper ornament, slot the card pieces together, 3D print the halves. Which one came out closest to the screen, and why?

Practical notes

For co-ops, microschools, and classrooms

Decorate a class tree. Each student makes an ornament, saves it, and presses Class tree to hang it on one tree the whole class shares. The tree shows every ornament as its maker last saved it. Classmates see the shapes, colors and letters; pictures and drawings stay with their owner. Then print the paper ornaments and hang the real ones.

Common questions

Is Ornament Lab free?

Yes. It runs in your browser and there is no paid tier. A free account adds saving and sharing, but nothing on this page is behind a paywall.

Does my child need an account to try it?

No. The demo on this page is the complete lab with a red ball loaded. Make a free account to save an ornament, share it, and hang it on a tree in Christmas Tree Lab.

Can we make the real ornament?

Yes, several ways. A paper ornament folded from copies of its outline, two card pieces that slot together, a template to cut from rolled dough or clay, a 3D print in two halves to glue, or a cut file for a laser cutter. Templates print at their real size; one bigger than a page is tiled over several pages to trim and tape.

Can students 3D print it?

Yes. A round ornament is cut at its widest into two halves, each lying on its flat face, so it prints with no support. A flat one prints lying down. The hanger is left off: use a real hook or a ribbon.

Can students make an ornament from something they built in another app?

Yes. From a model takes a 3D model from the student's own Files, such as a hat from Hat Lab or a model from Blockbench, and hangs it from a cap. It can go inside a glass ball with snow.

What ages is it for?

Ages 7 through high school. Picking, painting and naming an ornament works for younger students. The outline rule, the code patterns and the templates fit older ones.

Still have a question? Ask us, and a person will write back.

Where to go next

Start with Ornament Lab

Trying it costs nothing and takes about five minutes. An account is what makes the work last.

Ornament Lab is one of the making apps on the platform. It is a place to make things, not a course, and it is not a substitute for a teacher: it is at its best when an adult asks the questions above and takes the answers seriously.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.