Signal Station
Reading a code chart is easy. Reading a lamp that is blinking at you is not, and that is the skill signalers actually need. Signal Station puts two signal stations on either side of the water. Students key Morse code on a lamp, pose a signaler's two flags, or run signal flags up a mast, and the far station reads what they sent. Then it sends something back for them to copy, letter by letter, with no text to lean on. Free, in the browser, no account needed to try it.
Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Pairs sit at two computers in one build-together session. One keys a short message, the other copies it from the blinking lamp, and both see what was sent beside what was copied. Then they swap and try it with the flags.
Set up a free class Share to Google ClassroomWhat a student actually does
The first-minute guide starts them on the key. A tap lights the lamp for a dot, a hold for a dash, and one dot is E. They send E and then T, then their own name letter by letter with the Morse chart open beside them. Then the far station sends a short word, its lamp blinking across the water, and they write what they see. A wrong copy gets the underlined letters and the same word again, slower. The guide moves on to the flags, where they drag the signaler's arms to make A and spell their name, and to the mast, where they run up the signal flag for their first letter.
Each code has its own tab. On Lamp, the speed box sets how fast letters are sent and how far apart, and the far station can send a word, the student's name, a message of six to ten words, or SOS as a practice distress call. Flags in hand has the semaphore chart and a signaler to pose. Hoist has a rack of signal flags, up to four on the halyard at once, and the meaning of each one flown alone. Everything sent and copied goes into a station log, and the signal card prints the student's name in all three codes, the milestones they have reached and the six-to-ten-word messages they got every word of. Cub mode is a slower version with a bigger key and the tape always on. Operator mode adds radio: a tone under band noise, a signal that fades, another station keying nearby, lessons that add one letter at a time, and a whole contact from call to sign-off.
The far station sending a word at dusk. The tape writes the dots and dashes as they arrive, and the student writes the letters into the copy box. When the message ends, the check shows what was sent beside what was copied, with the wrong letters underlined.
R in flag semaphore: both flags straight out. A student drags the signaler's arms into place and holds still, and the letter is made. Letters go round in circles: A to G move one arm while the other stays down.
What they are learning while they play
Nothing here is presented as a lesson. This is what the activity is made of.
| What the student does | What it is |
|---|---|
| Taps the key for a dot and holds it for a dash | Morse code. Letters made of short and long signals. A dash is three dots long, so a reader can tell them apart at any speed. |
| Sends E with one dot and T with one dash | Efficient codes. The most common letters in English got the shortest codes, so messages take less time to send. Compression works on the same idea. |
| Writes down what the far lamp blinks | Receiving. Copying from the signal itself, not from text. The gaps matter as much as the flashes: a short gap is inside a letter, a longer one ends it. |
| Compares what was sent with what was copied | Errors and checking. A signal can be sent badly or read badly. Seeing both side by side shows which letters went wrong, and why. |
| Drags the signaler's arms and holds still | Flag semaphore. Two flags, eight positions each. The letters follow a pattern of circles, so learning A to G unlocks the rest. |
| Runs one flag up the mast and reads its meaning | Signal flags. Ships use a set of flags for the letters, and each one flown alone also has a meaning, from needing a pilot to keeping clear. |
| Copies a radio signal that fades under noise | Signal and noise. A weak signal loses letters under the noise. Operators slow down, ask for a repeat, and send each letter clearly enough to survive it. |
| Keys a message that a classmate copies | A shared protocol. A signal only works when both ends agree on the code and the timing. That is true of a flashlight and of the internet. |
How to tell whether it landed
Ask, and let them show you. A student who has understood it can answer these without help.
- Why does a dash have to be three dots long, not just longer than a dot?
- Your copy came back with underlined letters. Was it the sending or the reading that went wrong, and how can you tell?
- E is one dot and T is one dash. Why would the people who made Morse code give those two letters the shortest codes?
- Which letters can you make with the flags by moving only one arm?
- Your classmate's lamp keeps running two letters together. What would you tell them to change?
Use it in your subject
Not a technology class? Then the app is how students show what they learned in your unit. More projects for every subject.
Computer science
Compare Morse code with binary: both send everything as two kinds of signal. Count how many dots and dashes a sentence takes, then work out why common letters got short codes.
History
Put the three codes in order: flags at sea, semaphore for messages within sight, Morse over telegraph wires and then radio. Ask what each one could do that the one before could not.
Scouting and clubs
Practice signaling between two stations without needing two hilltops: each pair sends a message, copies one back, and prints a signal card with the name in three codes and the messages they got right.
Practical notes
- AgesAges 9 through high school. Cub mode, with a big key, slow sending and the tape always on, suits younger students; Operator mode, with radio noise and full-speed lessons, suits older ones.
- TimeThe first-minute guide takes a student from the first dot to a name in three codes. A pair can send and copy a few messages each in one period.
- EquipmentA computer or Chromebook with a keyboard and a modern browser. The space bar is the key. Sound helps, so headphones are useful in a full room. Nothing to install.
- CostFree. The app has no paid tier.
- PrepAbout ten minutes: run the first-minute guide yourself, then try one build-together session with a second browser so you know what students will see.
- In a groupSignaling needs two stations. Pairs work in a build-together session, one sending and one copying, and both see the check when a message ends. A student without a partner signals with the far station instead.
For co-ops, microschools, and classrooms
Pair students up and have them signal to each other. One keys a message, the other copies it from the blinking lamp, and the check at the end shows exactly which letters made it across. The argument about whose fault a wrong letter was is the lesson.
- Morse code by lamp, flag semaphore and signal flags, each with its own chart.
- Two students signal each other in a build-together session, with no chat.
- A station log and a printable signal card for each student.
- No install, no per-seat license. Student work is private by default.
Common questions
Is it free?
Yes. It runs in your browser and there is no paid tier. A free account adds saving and signaling with a classmate, but nothing on this page is behind a paywall.
Does my child need an account to try it?
No. The demo on this page is the whole app, starting with the first-minute guide. Saving the station log and the signal card needs a free account.
Does it send anything for real?
No. It is practice. A signal sent in the app reaches only the other station in the app, never a real radio or anyone who could respond, and that includes SOS. The station names are practice names, because a real radio call sign comes with a license.
How do two students signal each other?
One opens Build together in the bar above the app and sends the link to a classmate. When the classmate opens it, the first student's key lights their lamp, their flags are the ones the classmate reads, and their hoist goes up the classmate's mast. Who can join follows the platform's rules: classmates, friends who follow each other, and family. A third person who opens the link watches.
Can students write to each other in it?
There is no chat. A message a student types for the station to send is checked by the platform's word filter before it goes out, and so is the station name. What a student keys by hand travels as dots and dashes or flag poses, and the classmate sees it written out only in the check after the message ends.
Which codes does it use?
International Morse code with the standard timing, where a dash is three dots and the gap between letters is three dots; for beginners the speed box can stretch the gaps while the letters stay quick. The flag semaphore of eight arm positions. The International Code of Signals for the flags at the mast, with each single flag's meaning given in plain words. The Radio chart in Operator mode adds the phonetic alphabet and common Q signals such as QRS, send more slowly.
Does it make sound?
Yes. The key sounds a tone while it is down, and the far station's lamp sounds too. There is a Sound checkbox to turn it off, and Operator mode adds radio noise.
Can a student print their work?
Yes. Signal card prints one page with the student's name in Morse, semaphore and signal flags, the milestones reached, the flags they know by meaning, and the messages of six to ten words they sent or copied with every word right.
Is a student's work public?
No. Projects are private by default. A student can choose to share one. In a class the teacher can see students' projects.
Still have a question? Ask us, and a person will write back.
Where to go next
Start with Signal Station
Trying it costs nothing and takes about five minutes. An account is what makes the work last.
Signal Station is one of the making apps on the platform. It is practice: nothing it sends leaves the app. It is a place to make things, not a course, and it is not a substitute for a teacher: it is at its best when an adult asks the questions above and takes the answers seriously.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.