Free · no signup to try · nothing to install

BlocksCAD

BlocksCAD is 3D design done with code blocks instead of a mouse. Every shape is a block with numbers in it: a cylinder with a radius and a height, a translate that moves it, a loop that repeats it. Here it opens on a rocket built that way, with a red nose cone, a round window and three fins made by one loop. Change the loop's 120 to 60, press Render, and the rocket has six fins. When a model is done, it saves as an STL file for a 3D printer.

The blocks are on the left and the model is on the right. Click a number in a block, type a new one, then press Render at the bottom right to rebuild the model. Drag the model to turn it, and Shift + drag to slide it. The colored tabs on the far left hold more blocks to drag in.

Open it full screen

Using this with a class? Make a free class and add your students yourself: each gets a username and password, with no email or Google account needed. Or give them one join code. Using Google Classroom? Post the link there; with a free class, the link also puts each student in your class, so you see their work. mytekDev is also available from the Google Workspace Marketplace, so your school's Google admin can install it for everyone.A first lesson: Everyone opens the same rocket, changes only the number after "by" in the fin loop, and predicts how many fins they will get before pressing Render. Then they find a number that gives five fins and explain why it works.

Set up a free class Share to Google Classroom
Put this on your class site

Students can use BlocksCAD right on your page, with no account. What they make stays on that page; to keep their work, they make a free account.

Google Sites: Insert, then Embed, then By URL, and paste this address.

https://mytekdev.com/try/blockscad?embed=1

Canvas, a blog, or any page that takes HTML: paste this code where you edit the page as HTML.

<iframe src="https://mytekdev.com/try/blockscad?embed=1" width="100%" height="640" style="border:0" allow="fullscreen" title="BlocksCAD demo from mytekDev"></iframe>

What a student actually does

They look at the rocket and then at the blocks, and match them up: the cylinder with height 34 is the body, the cylinder that goes from radius 8 to 0 is the nose cone, the sphere is the window. They change a number, press Render, and see what moved. The fin loop is the one that surprises them, because one number decides how many fins there are and where each one points. Clicking a part of the rendered model selects the block that made it, so a student who cannot find the fin's block can click a fin.

From there they build their own. The 3D Shapes tab has spheres, cubes, cylinders and a torus, and 2D Shapes has circles, squares, polygons and stars that can be pulled up into 3D. Transforms move, turn, scale and color a shape. Set Ops join shapes together, cut one out of another, or keep only where they overlap. The Modify tab rounds edges, hollows a shape out, resizes it to an exact size in millimeters, and sits it on the floor ready to print. Loops, math and variables make a pattern instead of a pile of copies. The Code tab shows the OpenSCAD code the blocks wrote. With a free account, Generate saves the finished model as an STL file for a 3D printer, or a GLB 3D model, to the student's files.

Two views of the same rocket side by side. On the left the loop block reads count with i from 0 to 300 by 120, and the rocket below it has three red fins. On the right the same block reads by 60, and the rocket has six red fins spaced evenly around the body.

One number changed. The loop counts i from 0 to 300, and each time around it turns a fin by i degrees. By 120 gives i = 0, 120 and 240: three fins a third of a turn apart. By 60 gives 0, 60, 120, 180, 240 and 300: six fins. Ask for five and a student has to work out that 360 divided by 5 is 72.

What they are learning while they build

Nothing here is presented as a lesson. This is what the activity is made of.

What the student doesWhat it is
Moves the window up with the translate block's Z 3D coordinates. Every point has an X, a Y and a Z. Z is up, so a translate with Z 38 lifts the nose cone to sit on top of a body 34 tall that starts at 4.
Changes the loop from by 120 to by 60 Loops. A loop repeats the same blocks with a counter that changes each time. One fin written once becomes three or six, and changing the count changes all of them.
Works out the number that makes five fins Angles and division. A full turn is 360 degrees. Spacing fins evenly means dividing 360 by how many there are, so five fins are 72 degrees apart.
Flattens a cone with scale Y 0.2 to make a fin Scaling. Scaling stretches or squashes a shape along one direction. A round cone squashed to a fifth of its width becomes a thin swept fin.
Joins parts with union and cuts holes with difference Constructive solid geometry. Most 3D models are simple shapes added together or subtracted from each other. Union adds, difference cuts, intersection keeps only the overlap.
Opens the Code tab Code as a description. The blocks are a program. The Code tab shows the same program as OpenSCAD text, which is what an engineer would type.
Reads 24.3 × 27.8 × 52.0 mm and decides if it fits the printer Units and real size. A model for printing has a real size in millimeters. Numbers in the blocks are millimeters, so the rocket is about 5 cm tall.

How to tell whether it landed

Ask, and let them show you. A student who has understood it can answer these without help.

The fourth one is the real test. A student who says "360 divided by 5 is 72, so by 72" has connected the loop to the angle. One who tries numbers until it works has found the button, not the idea, and is ready for the question again.

Use it in your subject

Not a technology class? Then the app is how students show what they learned in your unit. More projects for every subject.

Math

Make a ring of evenly spaced shapes with a loop, then predict the spacing for 3, 4, 5, 6 and 8 copies before rendering each one. The class writes the rule.

Engineering and technology

Design a small part to a real size in millimeters, such as a name tag or a pencil holder, check its measurements in the viewer, and save the STL for the class 3D printer.

Computer science

Build the same model twice: once by copying blocks, once with a loop and a variable. Compare how many blocks each needs and which one is easier to change.

Practical notes

For co-ops, microschools, and classrooms

Give everyone the same model and one question that a number answers. The answers come back as shapes on a screen, so a wrong guess shows itself, and the student has to read the blocks to find out why.

Set up a free classroom

Common questions

Is it free?

Yes. It runs in your browser and there is no paid tier. A free account adds saving, but nothing on this page is behind a paywall.

Is this the original BlocksCAD?

It is the open-source BlocksCAD editor (version 1.13), released under the GNU GPL version 3 or later, hosted here with changes of our own. This is not blockscad3d.com, and this site is not run by, made by, or connected with the BlocksCAD Initiative or BlocksCAD, Inc., which hold the BlocksCAD name. What we add: projects that save to a free account, private by default; a Modify tab (offset, round edges, hollow out, flatten to 2D, resize, sit on the floor); polygon and star shapes; clicking the model to find the block that made it; and STL or GLB files saved to the student's files. Our changes are public on GitHub.

How is it different from blockscad3d.com?

For building and printing models, yes. blockscad3d.com is now run by the BlocksCAD Initiative, a nonprofit, and offers a basic account plus an educator account with classes, student account management and lessons for grades 3 to 12, with a 30-day free trial. Its site does not list a price. Here, every student gets the editor free, and a teacher can open the projects of students in their class, but there are no BlocksCAD lessons, and it is not connected with the BlocksCAD Initiative.

How is it different from Tinkercad Codeblocks?

Both build 3D models from code blocks. Tinkercad is a free product from Autodesk, and its Codeblocks makes 3D designs from code. BlocksCAD is open source, and its Code tab shows the OpenSCAD code the blocks write, so a student can move on to typing OpenSCAD itself. It is not made by or connected with Autodesk.

Does my child need an account to try it?

No. The demo on this page is the whole editor with the rocket loaded. Saving a project and saving STL files needs a free account.

Can students print what they make?

Yes. Generate saves the rendered model as an STL file, the format 3D printer slicers open, or as a GLB 3D model, to the student's files. The viewer shows the model's size in millimeters, and the sit on the floor block puts a model on the build plate, where printers start.

Where do the starting models come from?

With an account, starting a new BlocksCAD project asks how you want to start: from a blank page, or from one of the finished models, such as a robot, a little dragon, a chess rook, a fidget spinner or a name keychain. Each one opens as the student's own copy to change.

Does it run on a Chromebook?

Yes. It installs nothing and runs in the browser. Blocks are dragged with a mouse or trackpad, and Shift + drag slides the 3D view on a trackpad.

Is a student's work public?

No. Projects are private by default. A student can choose to share one. In a class the teacher can see students' projects.

What subject can I log this as?

Most families log it as engineering or computer science: 3D design, loops and variables. Spacing parts with angles and building to sizes in millimeters is geometry, so it counts toward math too.

Still have a question? Ask us, and a person will write back.

Where to go next

Start with BlocksCAD

Trying it costs nothing and takes about five minutes. An account is what makes the work last.

BlocksCAD is one of the making apps on the platform. Every detail on this page was read from the app itself with the rocket starter. It is a place to make things, not a course, and it is not a substitute for a teacher: it is at its best when an adult asks the questions above and takes the answers seriously.
BlocksCAD is open-source software from Einstein's Workshop and BlocksCAD, Inc., used under the GNU GPL version 3 or later. BlocksCAD is their trademark. Source.
Page last reviewed November 2026.
Google, Google Classroom and Chromebook are trademarks of Google LLC.